Button Chart

Here are the button names for reference:

Those are the generic GP2040-CE button names. Here's how they map to specific consoles:

GP2040-CE	XInput Xbox One	Switch	PS4	PS3	DirectInput	Arcade
B1	A	B	Cross	Cross	2	K1
B2	B	A	Circle	Circle	3	K2
B3	X	Y	Square	Square	1	P1
B4	Y	X	Triangle	Triangle	4	P2
L1	LB	L	L1	L1	5	P4
R1	RB	R	R1	R1	6	P3
L2	LT	ZL	L2	L2	7	K4
R2	RT	ZR	R2	R2	8	K3
S1	Back	Minus	Share	Select	9	Coin
S2	Start	Plus	Options	Start	10	Start
A1	Guide	Home	PS	PS	13	Home
A2	-	Capture	Touchpad	-	14	-

Button Combos for NeoPixel Settings

You can adjust the lighting effect with the following combos at any time (S1 is SEL and S2 is START):

Hotkey	Description
S1 + S2 + B3	Next Animation
S1 + S2 + B1	Previous Animation
S1 + S2 + B4	Brightness Up
S1 + S2 + B2	Brightness Down
S1 + S2 + R1	LED Parameter Up
S1 + S2 + R2	LED Parameter Down
S1 + S2 + L1	Pressed Parameter Up
S1 + S2 + L2	Pressed Parameter Down

Mini Menu

You can use the Mini Menu to switch Input Mode, D-Pad Mode, Profile, and more.

Press the Fn + HOME buttons to enter Mini Menu.

Then hold down Fn + joystick to navigate, Fn + START to pick a menu item or Fn + SEL to go back.

For example, if you want to change Input Mode from Xinput to Switch/Switch2:

• Fn + Home to enter Mini Menu
• Fn + START to pick Input Mode menu
• Fn + joystick down once to Nintendo Switch
• Fn + joystick down to Exit
• Fn + START to pick Save & Exit

The Fightstick will now restart in Switch mode.

Config Mode

You can also put the Fightstick into Config Mode so you can use your computer and the config web page. Press and hold START then press Reset. Go to 192.168.7.1 in your browser and configure away! You can also follow the instructions on the OLED screen to access a GPIO pin viewer, Stats, and more.