3D Printed Parts
I designed the enclosure to house all of the controls and the KB2040 breakout on the lid and walls so all of the wiring can be contained and dressed before screwing on the bottom. There are also multiple supports built in to provide rigidity.
3MF files for 3D printing are oriented and ready to print on FDM machines using PLA filament. You can download the STEP or STL files below if you want to make modifications.
Slice Settings for PLA
- Extruder 220ºC
- 0.2mm Layer Height
- 15% Grid infill
- No supports
- 60ºC heated bed
Optional Text
The top plate has optional text embedded in it in the 3MF file. If you don't want this or can't print dual filament, use the plain STL file.
Page last edited March 03, 2026
Text editor powered by tinymce.
