In this project we'll build a set of Antenna Eyes!
The Monster M4sk features a pair of realistic animated eyes on two LCD screens.
We can separate the two eyes and mount them on a headband to create these alien inspired antenna eyes!
The eyes are enclosed in a 3D Printed case and attach to springs on a headband. The springs allow them to sway, giving them a bit on movement to add a bit of life to the antennae!
The Monster M4sk features a splittable design! This allows you to cut along the perforations on the PBC to separate the two eyes. the Two boards are then connected via a JST SH 9-Pin cable.
We can even create a longer wire to increase the distance even further like we did with the longer antenna eyes!
Adafruit Monster M4SK
The Adafruit monster Mask packs a ton of awesome stuff into one single board. It’s running a cortex M4, it’s got 8 megabytes of flash storage, USB charging and 2x IPS TFT displays. It also has buttons, light sensor, expansion ports and accelerometer.
Be sure to check out the quick start guide for the full run down on code and graphics setup.
PRODUCT ID: 4343
Peep dis! Have you always wanted to have another pair of eyes on the back of your head? Or outfit your costume with big beautiful orbs? The MONSTER M4SK
PRODUCT ID: 3917
The eyes have it! Add this little lens to make a big expression with our Spooky Eyes demo for microcontrollers or Raspberry Pi. These are plastic lenses, with brilliant clarity and a...
PRODUCT ID: 4236
Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery...
PRODUCT ID: 1131
By popular demand, we now have a handy extension cord for all of our JST-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One end has a JST-PH socket, and the...
PRODUCT ID: 3890
For those who are fans of our silicone-covered wires, but are always looking to up their wiring game. We now have Silicone Cover Ribbon cables! These may look...
PRODUCT ID: 1690
Looking beyond ABS? Tired of PLA? Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated...
This guide was first published on Sep 17, 2019. It was last updated on Sep 17, 2019.
This page (Overview) was last updated on Oct 20, 2020.