Pot Switch Wiring

Save Subscribe

Pot Switch Cables

The potentiometer with switch uses two long cables.

  • 2-pin JST cable – 10cm long
  • 3-pin JST cable – 10cm long

Solder Cables to Pot Switch

Solder the 2-pin JST cable to the two switch pins on the potentiometer.

Solder the 3-pin JST cable to the voltage, ground and signal pins on the potentiometer.

 Feather Headers PowerBoost 1000C Wiring 

This guide was first published on Feb 24, 2021. It was last updated on Feb 24, 2021.

This page (Pot Switch Wiring) was last updated on Feb 16, 2021.

Text editor powered by tinymce.