The diagram below provides a visual reference for wiring of the components. This diagram was created using the software package Fritzing.

Adafruit Library for Fritzing

Use Adafruit's Fritzing parts library to create circuit diagrams for your projects. Download the library or just grab individual parts. Get the library and parts from GitHub - Adafruit Fritzing Parts.

Wired Connections

PowerBoost 1000C to Servo FeatherWing

  • 5V from PowerBoost to Voltage+ on Servo FeatherWing
  • GND from PowerBoost to GND- on Servo FeatherWing

PowerBoost 1000C to FeatherWing Doubler

  • 5V from PowerBoost 1000C to VBAT on Doubler FeatherWing

PowerBoost 1000C

  • 10k Resistor on EN and GND
  • 2200mAh battery to JST port on PowerBoost 1000C

Potentiometer with Switch to Doubler FeatherWing

  • GND from potentiometer to GND on Doubler FeatherWing
  • Signal from potentiometer to A0 on Doubler FeatherWing
  • VCC from potentiometer to 3V on Doubler FeatherWing
  • Switch to VS and EN on PowerBoost 1000C

Micro Servo to Servo FeatherWing

  • Servo 1 to Channel 0 (GND, VCC, Signal) on Servo FeatherWing
  • Servo 2 to Channel 1 (GND, VCC, Signal) on Servo FeatherWing

This guide was first published on Feb 24, 2021. It was last updated on Jun 17, 2024.

This page (Circuit Diagram) was last updated on Mar 08, 2024.

Text editor powered by tinymce.