Monochrome 1.3" OLED module with Adafruit logos falling like snow
These displays are small, only about 1.3" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels,...
$19.95
In Stock
Trinket wired up to two servo motor pan-tilt kit.
Deprecation Warning: The Pro Trinket bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still...
$9.95
In Stock
Plastic cylinder with two wires sticking out
The "poor man's" accelerometer/motion sensor! These spring-vibration switches are high sensitivity non-directional vibration induced trigger switches....
$0.95
In Stock
Breadboard-friendly SPDT Slide Switch
These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadboard. They're easy to switch...
Out of Stock
Adafruit LiIon/LiPoly Backpack soldered onto a Pro Trinket, plugged into a solderless breadboard.
If you have an ItsyBitsy or Pro Trinket you probably know it's the perfect little size for a portable project. This LiPoly backpack makes it really easy to do! Instead of wiring 2...
$4.95
In Stock
Lithium Ion Polymer Battery 3.7v 100mAh with JST 2-PH connector
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
$5.95
In Stock
USB Patterned Fabric Cable with Type A and Micro B ends
Oooh it's so soft! And that beautiful pattern! If you have to have visible cables then you might as well have the nicest fabric bound cable with a eye-catching snake-like...
Discontinued
Assembled PrintrBot Simple Metal 3D Printer
New from Printrbot, the Metal Simple is a brand new rock solid, all metal, fully-assembled Printrbot Simple! As opposed to the Printrbot...
Discontinued
Spool of PLA filament for 3D printers - white color with 1.75mm Diameter.
Having a 3D printer without filament is sort of like having a regular printer without paper or ink.  And while a lot of printers come with some filament there's a good chance...
Discontinued
Spool of PLA filament for 3D printers - white color with 3mm Diameter.
Having a 3D printer without filament is sort of like having a regular printer without paper or ink.  And while a lot of printers come with some filament there's a good chance...
Discontinued
Stop motion of person popping a print off flexible plate
Removing 3D printed parts can be tough. Sometimes pieces get stuck to your 3D printing plate and their bottoms get stuck to your build plate.  Over time, chiseling objects off can...
Discontinued