The 3D files for this project can be downloaded by clicking the button below.

This design for this project is based on the hollow anatomical heart model created by Brian Locicero.

Print Settings

Each of these quadrants requires some support. This project prints well with the following settings:

  • 0.2mm Layer Height / 0.4mm nozzle
  • 80mm/s printing speed
  • 20% infill
  • Supports: Yes

This guide was first published on Aug 28, 2019. It was last updated on Aug 28, 2019.

This page (3D Printing) was last updated on Aug 19, 2019.

Text editor powered by tinymce.