3D Print the Enclosure

What If I Don't Have A 3D Printer?

Not to worry! You can use a 3D printing service such as 3DHubs or MakeXYZ to have a local 3D printer operator 3D print and ship you parts to you. This is a great way to get your parts 3D printed by local makers. You could also try checking out your local Library or search for a Maker Space.

3D Printed Parts

The enclosure is comprised of four parts. Each part is listed below with a description. Parts with mounting holes and standoffs can be tapped with an M2.5 size screw tap – This creates precise threads needed for fastening screws. These parts are designed for FDM style 3D printers. 

These files were modified from the original design by the Ruiz Bros. for the NeoTrellis Game enclosure.

Snap Fit Tolerances

The four parts are designed to snap fit together. Chamfered tabs on the inside edges of the frame lock into indentations along the lip of the top and bottom covers. To produce these tolerances, you may need to adjust printer's slice settings.

Slice Settings

 

Use these settings as reference. Values listed were used in Ultimaker's CURA 3.X slicing software.

 

  • 0.2mm Layer Height / 0.4mm nozzle
  • 0.38mm Line Width (inner & outer widths)
  • 60mm/s printing speed
  • 60% infill
  • No support materials required
This guide was first published on Oct 27, 2018. It was last updated on Oct 27, 2018. This page (3D Print the Enclosure) was last updated on Jun 17, 2019.