Parts List
STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below.
File names
- silo-case.stl
- silo-roof.stl
- bottom-pms5003.stl
- bottom-pmsa003i.stl
- mounting-plate.stl
- pcb-mount.stl
- tripod-plate.stl
- PG7-plug.stl
- pmsa003i-bracket.stl
Heat Set Inserts
The case uses 4x M3 x 4mm long heat set inserts to secure the PCB mount and bottom cover. The case is sized for the heat set inserts that are stocked in the Adafruit shop.
Install Heat Set Inserts
Use a heat-set insert for your soldering iron to install the heat set inserts.
Wanna improve the connection strength between your project's 3D-printed parts, and also have nice clean surfaces? Instead of gluing bits together, or screwing plastic screws...
$9.95
In Stock
Wanna improve the connection strength between your project's 3D-printed parts, and also have nice clean surfaces? Instead of gluing bits together, or screwing plastic screws...
$5.95
In Stock
Page last edited March 08, 2024
Text editor powered by tinymce.
