Assign colors

Enter the paint environment inside your slicing program to assign colors to each polygon.

In Bambu Studio use the Fill tool and adjust the "Smart fill angle" option to modify the range of faces that are affected to color each section of the figure.

Add supports and slice

Enable tree supports to print overhangs and adjust any slicing settings to print the figure. 

You can customize slice settings to reduce the amount of waste by lowering the purge amount and the size of the purge tower. This print took roughly 15 to 17 hours to print.

We think this process will only get easier over time, but it's good to know all these tips and techniques for making a successful model that is optimized for 3D printing.