# Analog Devices ADT7410 Breakout
## Overview
Analog Devices, known for their reliable and well-documented sensor chips - has a high precision and high resolution temperature sensor on the market, and we've got a breakout to make it easy to use! The **Analog Devices ADT7410** gets straight to the point - it's an I2C temperature sensor, with 16-bit 0.0078°C temperature resolution and 0.5°C temperature tolerance. Wire it up to your microcontroller or single-board computer to get reliable temperature readings with ease.
The ADT7410 has 2 address pins, so you can have up to 4 sensors on one I2C bus. There's also interrupt and critical-temperature alert pins. The sensor is good from 2.7V to 5.5V power and logic, for easy integration.
We've got both [Arduino (C/C++)](https://learn.adafruit.com/adt7410-breakout/arduino) and [CircuitPython (Python 3)](https://learn.adafruit.com/adt7410-breakout/python-and-circuitpython) libraries available so you can [use it with any microcontroller like Arduino](https://learn.adafruit.com/adt7410-breakout/arduino), ESP8266, Metro, etc. or with [Raspberry Pi or other Linux computers](https://learn.adafruit.com/adt7410-breakout/python-and-circuitpython) [thanks to Blinka (our CircuitPython library support helper)](https://learn.adafruit.com/circuitpython-on-raspberrypi-linux).
To get you going fast, we spun up a custom made PCB with the ADT7410 and some supporting circuitry such as pullup resistors and capacitors, in the [**STEMMA QT** form factor](https://www.adafruit.com/?q=stemma%20qt%20sensor "STEMMA QT form factor"), making them easy to interface with. The [STEMMA QT connectors](https://learn.adafruit.com/introducing-adafruit-stemma-qt/what-is-stemma-qt) on either side are compatible with the [SparkFun Qwiic](https://www.sparkfun.com/qwiic) I2C connectors. This allows you to make solderless connections between your development board and the ADT7410 or to chain them with a wide range of other sensors and accessories using a [**compatible cable**](https://www.adafruit.com/?q=stemma%20qt%20cable). A [QT Cable is not included, but we have a variety in the shop](https://www.adafruit.com/?q=stemma+qt+cable&sort=BestMatch).
Each order comes with a fully tested and assembled breakout and some header for soldering to a PCB or breadboard. You'll be up and running in under 5 minutes!
[Thanks to Digi-Key](https://www.digikey.com/) and [Analog Devices](https://www.analog.com/en/index.html) for sponsoring the development of this breakout board - we've made the PCB "[Digi-Key red](https://www.digikey.com/)" in their honor!
## Technical Specs
- Wide input-voltage range: 2.7 V to 5.5 V.
- Up to 16-bit temperature resolution (0.0078°C per lsb), default is 13 bits (0.0625°C per lsb).
- Highly accurate temperature tolerances:
- ±0.5°C from −40°C to +105°C (2.7 V to 3.6 V)
- ±0.4°C from −40°C to +105°C (3.0 V)
- Configurable I2C address allows up to four sensors on the I2C bus.
- Operates over I2C, so only two shared lines required.
Info:
- [Next Page](https://learn.adafruit.com/adt7410-breakout/pinouts.md)
## Primary Products
### ADT7410 High Accuracy I2C Temperature Sensor Breakout Board
[ADT7410 High Accuracy I2C Temperature Sensor Breakout Board](https://www.adafruit.com/product/4089)
Analog Devices, known for their reliable and well-documented sensor chips - has a high precision and high resolution temperature sensor on the market, and we've got a breakout to make it easy to use! The **Analog Devices ADT7410** gets straight to the point -...
Out of Stock
[Buy Now](https://www.adafruit.com/product/4089)
[Related Guides to the Product](https://learn.adafruit.com/products/4089/guides)
## Featured Products
### STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long
[STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long](https://www.adafruit.com/product/4399)
This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.
In Stock
[Buy Now](https://www.adafruit.com/product/4399)
[Related Guides to the Product](https://learn.adafruit.com/products/4399/guides)
### STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long
[STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long](https://www.adafruit.com/product/4401)
This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.
In Stock
[Buy Now](https://www.adafruit.com/product/4401)
[Related Guides to the Product](https://learn.adafruit.com/products/4401/guides)
### STEMMA QT / Qwiic JST SH 4-pin to Premium Male Headers Cable
[STEMMA QT / Qwiic JST SH 4-pin to Premium Male Headers Cable](https://www.adafruit.com/product/4209)
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert...
In Stock
[Buy Now](https://www.adafruit.com/product/4209)
[Related Guides to the Product](https://learn.adafruit.com/products/4209/guides)
### STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets
[STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets](https://www.adafruit.com/product/4397)
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium female headers on the other. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and...
In Stock
[Buy Now](https://www.adafruit.com/product/4397)
[Related Guides to the Product](https://learn.adafruit.com/products/4397/guides)
### JST SH 4-pin Cable with Alligator Clips - STEMMA QT / Qwiic
[JST SH 4-pin Cable with Alligator Clips - STEMMA QT / Qwiic](https://www.adafruit.com/product/4398)
This cable will make it super easy to use our plug-and-play STEMMA QT boards with boards like Circuit Playground. On one end you get a Qwiic / STEMMA QT connector (technically known as a JST SH 4-pin plug) into 4 individual wires with grippy alligator clips. We're carrying these to...
Out of Stock
[Buy Now](https://www.adafruit.com/product/4398)
[Related Guides to the Product](https://learn.adafruit.com/products/4398/guides)
## Related Guides
- [IoT Temperature Logger with Analog Devices ADT7410, Feather and Adafruit IO](https://learn.adafruit.com/iot-temperature-logger-with-arduino-and-adafruit-io.md)
- [IoT Temperature Logger with Analog Devices ADT7410, Raspberry Pi, and Adafruit IO](https://learn.adafruit.com/iot-temperature-logger-with-python-and-adafruit-io.md)
- [All the Internet of Things - Episode Four: Adafruit IO](https://learn.adafruit.com/all-the-internet-of-things-episode-four-adafruit-io.md)
- [Gemma LightTouch](https://learn.adafruit.com/gemma-lighttouch.md)
- [Adafruit Music Maker FeatherWing](https://learn.adafruit.com/adafruit-music-maker-featherwing.md)
- [Adafruit AS5600 Magnetic Angle Sensor](https://learn.adafruit.com/adafruit-as5600-magnetic-angle-sensor.md)
- [Adafruit Mini PiTFT - Color TFT Add-ons for Raspberry Pi](https://learn.adafruit.com/adafruit-mini-pitft-135x240-color-tft-add-on-for-raspberry-pi.md)
- [Adafruit CH552 QT Py](https://learn.adafruit.com/adafruit-ch552-qt-py.md)
- [Planetary Gear Dreidels](https://learn.adafruit.com/planetary-gear-dreidels.md)
- [32x32 Square Pixel Art Animation Display](https://learn.adafruit.com/32x32-square-pixel-display.md)
- [Adafruit QSPI DIP Breakout Boards](https://learn.adafruit.com/adafruit-qspi-dip-breakout-boards.md)
- [PyPortal Word of the Day Display](https://learn.adafruit.com/pyportal-word-of-the-day-display.md)
- [Cyber Cat MIDI Keyboard](https://learn.adafruit.com/midi-cyber-cat-keyboard.md)
- [Deluxe 4x4 NeoPixel Keypad](https://learn.adafruit.com/deluxe-4x4-neopixel-neokey-keypad.md)
- [Machine Learning 101 with Lobe and BrainCraft](https://learn.adafruit.com/machine-learning-101-lobe-braincraft.md)