0

Overview

Author Gravatar Image SIMON MONK

One of the first things that you will want to do is to get your Raspberry Pi connected up to the Internet.

In this lesson, you will learn how to:

  • Connect using an Ethernet cable

  • Use a WiFi adapter with both Raspbian and Occidentalis

  • Find out the IP address of your Raspberry Pi

learn_raspberry_pi_network_LEDs.jpg
USING A WIRED NETWORK
Last updated on 2014-04-06 at 12.54.27 PM Published on 2012-12-10 at 09.10.36 PM

RELATED GUIDES

FEATURED
Raspberry Pi as an Ad Blocking Access Point
Ads? What Ads?
Advertising is prevalent on the web. It's a necessary evil at times, but can also be greatly overused by companies slowing down your page loads, and bringing your connected devices to a crawl. Learn how to block these ads using your Raspberry Pi.
Author Gravatar Image JUSTIN COOPER
FEATURED
Raspberry Pi WiFi Radio
Internet-streamed music around the house
Raspberry Pi, the little wonder-puter that’s taken the world by storm, is so affordable that we can create single-purpose “appliances” around them without shame. Here’s our take on one of the more popular such applications: internet streaming media, the Pandora music service specifically.
Author Gravatar Image PHILLIP BURGESS
Adafruit's Raspberry Pi Lesson 6. Using SSH
Learn how to remote control your Raspberry Pi using SSH
In this lesson you will learn how to remote control your Raspberry Pi over your local network using Secure Shell (SSH).
Author Gravatar Image SIMON MONK
DHT Humidity Sensing on Raspberry Pi with GDocs Logging
Humidity and Temperature Logging From Your Pi to the Cloud!
In this tutorial we'll be showing how to utilize C for high-speed GPIO polling to handle bit-banged sensor output. Many low cost sensors have unusual output formats, and in this case, a "Manchester-esque" output that is not SPI, I2C or 1-Wire compatible must be polled continuously by the Pi to decode. Luckily, the C GPIO libraries are fast enough to decode the output.
Author Gravatar Image LADY ADA