0

Test & Configure

by Simon Monk
learn_raspberry_pi_reboot.png

Reboot your Pi – click the icon bottom right – and this time you should boot straight up into the windowing environment.

In the next tutorial, we will look at configuring WiFi and finding the IP address of your Pi.

RUNNING RASPI-CONFIG AFTER BOOTING
This guide was first published on Dec 04, 2012. It was last updated on Oct 14, 2018. This page (Test & Configure) was last updated on May 04, 2015.

RELATED GUIDES

Adafruit's Raspberry Pi Lesson 13. Power Control
Control 110V devices from your Raspberry Pi
by Simon Monk
In this lesson, you will combine the PIR sensor from [Lesson 12] with the Powerswitch Tail 2 module from Adafruit, to automatically switch something on when movement is detected.
POPULAR
Adafruit's Raspberry Pi Lesson 5. Using a Console Cable
Learn how to Connect to your Raspberry Pi with a Console Cable
by Simon Monk
In this lesson, you will learn how to remote control your Raspberry Pi with a console cable.
POPULAR
Adafruit's Raspberry Pi Lesson 3. Network Setup
Learn how to connect to the Internet wirelessly or with Ethernet
by Simon Monk
In this lesson, you will learn how to connect to the Internet wirelessly and with an Ethernet cable, and also find the IP address of your Raspberry Pi.
Using a Mini PAL/NTSC Display with a Raspberry Pi
Use a tiny composite video display with a Raspberry Pi
by Simon Monk
In this tutorial, you will learn how to attach a miniature display to your Raspberry Pi and to adjust the Pi's settings to reduce the resolution sufficiently to read the screen.