Parts

To build the project described in this lesson, you will need the following parts.

learn_raspberry_pi_pi.jpg

Raspberry Pi

learn_raspberry_pi_temp_probe.jpg

DS18B20 Digital temperature sensor + extras, or waterproof or high temperature versions (see products sidebar)

You'll also need a 4.7K or 10K ohm resistor, it comes with the sensor when purchased from Adafruit

learn_raspberry_pi_breadboard_half_web.jpg

Half-sized breadboard

learn_raspberry_pi_jumpers_web.jpg

Jumper wire pack

learn_raspberry_pi_cobbler.jpg

Pi Cobbler
Last updated on 2016-10-28 at 06.56.57 PM Published on 2013-01-28 at 04.35.41 PM