Assembly

Prepare the header strip:

 

Cut the strip to length if necessary. It will be easier to solder if you insert it into a breadboard - long pins down

Add the FeatherWing:

 

Place the featherwing over the pins so that the short pins poke through the two rows of breakout pads

And Solder!

 

Be sure to solder all pins for reliable electrical contact.

(For tips on soldering, be sure to check out ourGuide to Excellent Soldering).

Start by soldering the first row of header

Now flip around and solder the other row completely

You're done !

Attach an ethernet cable, & plug it into your feather of choice!

This guide was first published on Jul 27, 2016. It was last updated on Jul 27, 2016. This page (Assembly) was last updated on Oct 19, 2019.