This page shows the TPL5110 but the TPL5111 procedure is identical!

Prepare the header strip:

Cut the strip to length if necessary. It will be easier to solder if you insert it into a breadboard - long pins down

Add the breakout board and Solder!

Place the breakout board over the pins so that the short pins poke through the breakout pads


Be sure to solder all 5 pins for reliable electrical contact.

(For tips on soldering, be sure to check out our Guide to Excellent Soldering).

You're done! Check your solder joints visually and continue onto the next steps

This guide was first published on Aug 16, 2017. It was last updated on Jul 10, 2024.

This page (Assembly) was last updated on Mar 01, 2017.

Text editor powered by tinymce.