# Adafruit SGP30 TVOC/eCO2 Gas Sensor ## Overview ![](https://cdn-learn.adafruit.com/assets/assets/000/097/488/medium800/adafruit_products_SGP30_top_angle.jpg?1607373613) Breathe easy with the SGP30 Multi-Pixel Gas Sensor, a fully integrated MOX gas sensor. This is a very fine air quality sensor from the sensor experts at Sensirion, with I2C interfacing and fully calibrated output signals with a typical accuracy of 15% within measured values. The SGP combines multiple metal-oxide sensing elements on one chip to provide more detailed air quality signals. This is a gas sensor that can detect a wide range of Volatile Organic Compounds (VOCs) and H2 and is intended for indoor air quality monitoring. When connected to your microcontroller (running our library code) it will return a Total Volatile Organic Compound (TVOC) reading and an equivalent carbon dioxide reading (eCO2) over I2C. ![](https://cdn-learn.adafruit.com/assets/assets/000/097/489/medium800/adafruit_products_SGP30_top_header.jpg?1607373621) The SGP30 has a 'standard' hot-plate MOX sensor, as well as a small microcontroller that controls power to the plate, reads the analog voltage, tracks the baseline calibration, calcluates TVOC and eCO2 values, and provides an I2C interface to read from. Unlike the CCS811, this sensor does not require I2C clock stretching. ![](https://cdn-learn.adafruit.com/assets/assets/000/097/486/medium800/adafruit_products_SGP30_back.jpg?1607373536) This part will measure  **eCO2**  (equivalent calculated carbon-dioxide) concentration within a range of 400 to 60,000 parts per million (ppm), and  **TVOC**  (Total Volatile Organic Compound) concentration within a range of 0 to 60,000 parts per billion (ppb). **Please note, this sensor, like all VOC/gas sensors, has variability and to get precise measurements you will want to calibrate it against known sources!** That said, for general environmental sensors, it will give you a good idea of trends and comparison. The SGP30 does have built in calibration capabilities, note that eCO2 is calculated based on H2 concentration, it is not a 'true' CO2 sensor for laboratory use. Another nice element to this sensor is the ability to set humidity compensation for better accuracy. An external humidity sensor is required and then the RH% is written over I2C to the sensor, so it can better calculate the TVOC/eCO2 values. ![](https://cdn-learn.adafruit.com/assets/assets/000/097/487/medium800/adafruit_products_SGP30_STEMMA_side.jpg?1607373603) Nice sensor right? So we made it easy for you to get right into your next project. The surface-mount sensor is soldered onto a custom made PCB in the[  **STEMMA QT**  form factor](https://www.adafruit.com/?q=stemma%20qt%20sensor "STEMMA QT form factor"), making them easy to interface with. The [STEMMA QT connectors](https://learn.adafruit.com/introducing-adafruit-stemma-qt/what-is-stemma-qt) on either side are compatible with the [SparkFun Qwiic](https://www.sparkfun.com/qwiic) I2C connectors. This allows you to make solderless connections between your development board and the SGP30 or to chain it with a wide range of other sensors and accessories using a [**compatible cable**](https://www.adafruit.com/?q=stemma%20qt%20cable). We’ve of course broken out all the pins to standard headers and added a 1.8V voltage regulator and level shifting so allow you to use it with either 3.3V or 5V systems such as the Raspberry Pi, or Metro M4 or Arduino Uno. Info: ![](https://cdn-learn.adafruit.com/assets/assets/000/050/253/medium800/adafruit_products_3709_top_ORIG_2018_01.jpg?1516228149) - [Next Page](https://learn.adafruit.com/adafruit-sgp30-gas-tvoc-eco2-mox-sensor/pinouts.md) ## Featured Products ### Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2 [Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2](https://www.adafruit.com/product/3709) Breathe easy with the SGP30 Multi-Pixel Gas Sensor, a fully integrated MOX gas sensor. This is a very fine air quality sensor from the sensor experts at Sensirion, with I2C interfacing and fully calibrated output signals with a typical accuracy of 15% within... In Stock [Buy Now](https://www.adafruit.com/product/3709) [Related Guides to the Product](https://learn.adafruit.com/products/3709/guides) ## Related Guides - [PyPortal IoT Weather Station](https://learn.adafruit.com/pyportal-iot-weather-station.md) - [Digital Nose Milk Freshness Checker](https://learn.adafruit.com/digital-nose-gas-sensor-milk-freshness-checker.md) - [Adafruit IO Environmental Monitor for Feather or Raspberry Pi](https://learn.adafruit.com/adafruit-io-air-quality-monitor.md) - [Adafruit IO Home: Security ](https://learn.adafruit.com/adafruit-io-home-security.md) - [FunHouse IoT Fume Extractor and Air Quality Sensor](https://learn.adafruit.com/funhouse-fume-extractor-iot-air-quality-sensor.md) - [Remote controlled door lock using a fingerprint sensor & Adafruit IO](https://learn.adafruit.com/remote-controlled-door-lock-using-a-fingerprint-sensor-and-adafruit-io.md) - [16-Step Drum Sequencer](https://learn.adafruit.com/16-step-drum-sequencer.md) - [Adafruit GA1A12S202 Log-scale Analog Light Sensor](https://learn.adafruit.com/adafruit-ga1a12s202-log-scale-analog-light-sensor.md) - [Adafruit BMP580, BMP581, and BMP585 - Temperature and Pressure Sensor](https://learn.adafruit.com/adafruit-bmp580-bmp581-and-bmp585-temperature-and-pressure-sensor.md) - [TMP006 Infrared Sensor Breakout](https://learn.adafruit.com/infrared-thermopile-sensor-breakout.md) - [Infinite Text Adventure](https://learn.adafruit.com/infinite-text-adventure.md) - [Adafruit TPL5110 Power Timer Breakout](https://learn.adafruit.com/adafruit-tpl5110-power-timer-breakout.md) - [Grand Central Soundboard in Ten Minutes](https://learn.adafruit.com/grand-central-soundboard-in-ten-minutes.md) - [DIY IoT Doorbell Camera with MEMENTO](https://learn.adafruit.com/diy-iot-doorbell-camera-with-memento.md) - [Adafruit I2C to 8 Channel Solenoid Driver](https://learn.adafruit.com/adafruit-i2c-to-8-channel-solenoid-driver.md)