# Adafruit SEN6x Breakout
## Overview
Warning: Please note: this board does NOT come with a JST GH-compatible cable NOR a SEN6x sensor! You can [pick up the cable here](https://www.adafruit.com/product/5754), and a [SEN6x from DigiKey](https://www.digikey.com/en/product-highlight/s/sensirion/environmental-sensor-node-sen6x).
Now you can quickly integrate the [Sensirion SEN6x environmental sensor node](https://blog.adafruit.com/2025/05/08/eye-on-npi-sensirion-sen66-environmental-sensor-node-eyeonnpi-digikey-digikey-sensirion-adafruit/) into your microcontroller or microcomputer project, with no soldering or fiddly breadboarding, thanks to the **Adafruit SEN6x Adapter Breakout** (for SEN66 and friends). We covered the awesome [Sensirion SEN66 environmental sensor nodes on EYE ON NPI](https://blog.adafruit.com/2025/05/08/eye-on-npi-sensirion-sen66-environmental-sensor-node-eyeonnpi-digikey-digikey-sensirion-adafruit/) a while ago; it's an awesome all-in-one air quality sensor, but it has the annoyance that it requires 3V power/logic, and it has a special cable connection.
This adapter breakout will make an instant friendship with all SEN6x boards, thanks to a JST GH-compatible connector in the middle which you can plug a [6-pin GH cable](https://www.adafruit.com/product/5754) directly between your SEN6x and this adapter. In the middle is a clean 3.3V regulator and level shifter, so you can use this module whether you're using 3.3V or 5V power and logic. [Then you can use any ol' STEMMA QT cable](https://www.adafruit.com/product/4210) to plug into your Metro, Feather, QT Py, Raspberry Pi, etc, etc. I2C port.
Once you've got it plugged together, you can run Sensirion's [Arduino library](https://github.com/Sensirion/arduino-i2c-sen66) or [Raspberry Pi Python library](https://github.com/Sensirion/raspberry-pi-i2c-sen66) to read temperature, humidity, VOC, Particulate Matter PM1 / PM2.5 / PM4, and PM10. (NOx reading is also available on the SEN55).
**Please note: this board does NOT come with a JST GH-compatible cable NOR a SEN6x sensor!** You [can pick up the cable here](https://www.adafruit.com/product/5754), and [a SEN6x from DigiKey](https://www.digikey.com/en/product-highlight/s/sensirion/environmental-sensor-node-sen6x).
- [Next Page](https://learn.adafruit.com/adafruit-sen6x-breakout/pinouts.md)
## Primary Products
### Adafruit SEN6x Breakout for Sensirion SEN66 - STEMMA QT / Qwiic
[Adafruit SEN6x Breakout for Sensirion SEN66 - STEMMA QT / Qwiic](https://www.adafruit.com/product/6331)
Now you can quickly integrate the [Sensirion SEN6x environmental sensor node](https://blog.adafruit.com/2025/05/08/eye-on-npi-sensirion-sen66-environmental-sensor-node-eyeonnpi-digikey-digikey-sensirion-adafruit/) into your microcontroller or microcomputer project, with no...
In Stock
[Buy Now](https://www.adafruit.com/product/6331)
[Related Guides to the Product](https://learn.adafruit.com/products/6331/guides)
## Featured Products
### JST GH 1.25mm Pitch 6 Pin Cable - 100mm long
[JST GH 1.25mm Pitch 6 Pin Cable - 100mm long](https://www.adafruit.com/product/5754)
This cable is a little over 100mm / 4" long and fitted with JST-GH compatible 6-pin connectors on either end.
We dig the solid and compact nature of these connectors and the latch that keeps the cable from coming apart easily, and the wires are even color coded!
In Stock
[Buy Now](https://www.adafruit.com/product/5754)
[Related Guides to the Product](https://learn.adafruit.com/products/5754/guides)
### STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long
[STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long](https://www.adafruit.com/product/4399)
This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.
In Stock
[Buy Now](https://www.adafruit.com/product/4399)
[Related Guides to the Product](https://learn.adafruit.com/products/4399/guides)
### STEMMA QT / Qwiic JST SH 4-pin Cable - 100mm Long
[STEMMA QT / Qwiic JST SH 4-pin Cable - 100mm Long](https://www.adafruit.com/product/4210)
This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.
In Stock
[Buy Now](https://www.adafruit.com/product/4210)
[Related Guides to the Product](https://learn.adafruit.com/products/4210/guides)
### STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets
[STEMMA QT / Qwiic JST SH 4-pin Cable with Premium Female Sockets](https://www.adafruit.com/product/4397)
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium female headers on the other. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and...
In Stock
[Buy Now](https://www.adafruit.com/product/4397)
[Related Guides to the Product](https://learn.adafruit.com/products/4397/guides)
### STEMMA QT / Qwiic JST SH 4-pin to Premium Male Headers Cable
[STEMMA QT / Qwiic JST SH 4-pin to Premium Male Headers Cable](https://www.adafruit.com/product/4209)
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert...
In Stock
[Buy Now](https://www.adafruit.com/product/4209)
[Related Guides to the Product](https://learn.adafruit.com/products/4209/guides)
### JST SH 4-pin Cable with Alligator Clips - STEMMA QT / Qwiic
[JST SH 4-pin Cable with Alligator Clips - STEMMA QT / Qwiic](https://www.adafruit.com/product/4398)
This cable will make it super easy to use our plug-and-play STEMMA QT boards with boards like Circuit Playground. On one end you get a Qwiic / STEMMA QT connector (technically known as a JST SH 4-pin plug) into 4 individual wires with grippy alligator clips. We're carrying these to...
Out of Stock
[Buy Now](https://www.adafruit.com/product/4398)
[Related Guides to the Product](https://learn.adafruit.com/products/4398/guides)
## Related Guides
- [Interpreting Environmental Sensor Data With Local "Edge" LLMs](https://learn.adafruit.com/interpreting-environmental-sensor-data-with-llms.md)
- [No-Code Indoor Air Quality Monitor with Separate Display](https://learn.adafruit.com/no-code-indoor-air-quality-monitor-with-separate-display.md)
- [Cartoon Character Clock](https://learn.adafruit.com/cartoon-character-clock.md)
- [Bounce - an accelerometer game in Arduino for PyGamer and PyBadge](https://learn.adafruit.com/bounce-an-accelerometer-game-in-arduino-for-pygamer-and-pybadge.md)
- [MCUME Emulators on Fruit Jam](https://learn.adafruit.com/mcume-emulators-on-fruit-jam.md)
- [WiFi Jellyfish Lantern with WLED](https://learn.adafruit.com/wifi-jellyfish-lantern-with-wled.md)
- [Adafruit Speaker Bonnet for Raspberry Pi](https://learn.adafruit.com/adafruit-speaker-bonnet-for-raspberry-pi.md)
- [Adafruit IoT Button with NeoPixel BFF](https://learn.adafruit.com/adafruit-iot-button-with-neopixel-bff.md)
- [Qualia S3 Fireplace](https://learn.adafruit.com/qualia-s3-fireplace.md)
- [Adafruit Pixel Shifter](https://learn.adafruit.com/adafruit-pixel-shifter.md)
- [Adafruit MacroPad RP2040](https://learn.adafruit.com/adafruit-macropad-rp2040.md)
- [LSM6DSOX, ISM330DHC, & LSM6DSO32 6 DoF IMUs](https://learn.adafruit.com/lsm6dsox-and-ism330dhc-6-dof-imu.md)
- [NeoPixel LED Heart Necklace](https://learn.adafruit.com/neopixel-led-heart-necklace.md)
- [ESP32 PlayStation Controller](https://learn.adafruit.com/esp32-playstation-controller.md)
- [Wireless Security Camera with the Arduino Yun](https://learn.adafruit.com/wireless-security-camera-arduino-yun.md)