# Adafruit QT Py ESP32-S3

## Overview

![](https://cdn-learn.adafruit.com/assets/assets/000/123/012/medium800/adafruit_products_5426-05.jpg?1690380299)

The ESP32-S3 has arrived in QT Py format - and what a great way to get started with this powerful new chip from Espressif! With dual 240 MHz cores, WiFi and BLE support, and native USB, this QT Py is great for powering your IoT projects.

The ESP32-S3&nbsp;is a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (SoC) solution that now has&nbsp; **WiFi** &nbsp;and&nbsp; **BLE** &nbsp;support,&nbsp; **built-in native USB** &nbsp;as well as some other interesting new technologies like Time of Flight distance measurements. With its state-of-the-art power and RF performance, this SoC is an ideal choice for a wide variety of application scenarios relating to the&nbsp;[Internet of Things (IoT)](https://www.adafruit.com/category/342),&nbsp;[wearable electronics](https://www.adafruit.com/category/65), and smart homes.

![](https://cdn-learn.adafruit.com/assets/assets/000/123/013/medium800/adafruit_products_5426-06.jpg?1690380311)

Info: CircuitPython BLE is available on the 8MB Flash version of this board, but there is not currently room for BLE on the 4MB flash board. CircuitPython 10 is planned to support the 4MB boards.

There are two versions of this board: 4MB Flash/2MB PSRAM or 8MB Flash/No PSRAM.&nbsp;

With native USB, this board will let you upgrade your existing ESP32 projects. Native USB means it can act like a keyboard or a disk drive, and no external USB-to-Serial converter required. WiFi and BLE mean it's awesome for IoT projects.

[OLEDs](https://www.adafruit.com/?q=qt+oled&main_page=category&cPath=1005&sort=BestMatch)!&nbsp;[Inertial Measurement Units](https://www.adafruit.com/?q=qt+imu&main_page=category&cPath=1005&sort=BestMatch)!&nbsp;[Sensors a-plenty](https://www.adafruit.com/?q=qt+sensor&main_page=category&cPath=1005&sort=BestMatch). All plug-and-play thanks to the innovative chainable design:&nbsp;[SparkFun Qwiic](https://www.sparkfun.com/qwiic)-compatible&nbsp;[STEMMA QT](https://learn.adafruit.com/introducing-adafruit-stemma-qt)&nbsp;connectors for the I2C bus so you don't even need to solder! Just plug in a compatible cable and attach it to your MCU of choice, and you’re ready to load up some software and measure some light.&nbsp;[Seeed Grove I2C boards](https://www.adafruit.com/product/4528)&nbsp;will also work with [this adapter cable](https://www.adafruit.com/product/4528).

![](https://cdn-learn.adafruit.com/assets/assets/000/123/014/medium800/adafruit_products_5426-03.jpg?1690380323)

The board's pinout and shape are [Seeed Xiao](https://wiki.seeedstudio.com/Seeeduino-XIAO/) compatible, with castellated pads, so you can solder it flat to a PCB. In addition to the QT connector, it also comes with an **RGB NeoPixel** &nbsp;(with controllable power pin to allow for ultra-low-power usage),&nbsp; **a reset button** (great for restarting your program&nbsp;or entering the bootloader), and a button on GPIO 0 for entering the ROM bootloader or for user input.

![](https://cdn-learn.adafruit.com/assets/assets/000/123/015/medium800/adafruit_products_5426-04.jpg?1690380356)

The ESP32-S3 has a dual-core 240 MHz chip, so it is comparable to ESP32's dual-core. However, there is no Bluetooth&nbsp; **Classic&nbsp;** support, only Bluetooth LE. This chip is a great step up from the earlier ESP32-S2! There are two versions of this board and each has a different version of the ESP32-S3 chip. There is one version with 8 MB flash and no PSRAM, but it does have 512KB of SRAM, so its fine for use with CircuitPython support as long as massive buffers are not needed. The second version has 4MB flash and 2MB PSRAM, making it a great choice for CircuitPython. Both are also great for use in ESP-IDF or with Arduino support.

![](https://cdn-learn.adafruit.com/assets/assets/000/123/016/medium800/adafruit_products_5426-01.jpg?1690380475)

- Same size, form-factor, and pinout as the Seeed Xiao.
- **USB Type C connector&nbsp;** -&nbsp;[If you have only Micro B cables, this adapter will come in handy](https://www.adafruit.com/product/4299)!
- **ESP32-S3 Dual Core 240MHz Tensilica processor&nbsp;** - the next generation of ESP32-Sx, with native USB so it can act like a keyboard/mouse, MIDI device, disk drive, etc.!
- Comes with&nbsp; **8MB Flash, 512KB SRAM, no PSRAM _OR_ 4MB Flash, 512KB SRAM, 2MB PSRAM**
- Native USB is supported by every OS - it can be used in Arduino or CircuitPython as a USB serial console, MIDI, Keyboard/Mouse HID, even a little disk drive for storing Python scripts.
- Can be used with the **Arduino IDE** &nbsp;or&nbsp; **CircuitPython**
- **Built-in RGB NeoPixel LED** with power control to reduce quiescent power in deep sleep.
- Battery input pads on underside with diode protection for external battery packs up to 6V input.
- **13&nbsp;GPIO pins:**
  - 11 on breakout pads, 2 more on QT connector.
  - 10 x 12-bit analog inputs (SPI high speed pads do not have analog inputs).
  - PWM outputs on any pin.
  - Two I2C ports, one on the breakout pads, and another with STEMMA QT plug-n-play connector.
  - Hardware UART.
  - Hardware SPI on the high speed SPI peripheral pins.
  - Hardware I2S on any pins.
  - 5 x Capacitive Touch with no additional components required.

- 3.3V regulator with&nbsp;[**600mA peak output**](https://www.diodes.com/assets/Datasheets/AP2112.pdf).
- Light sleep at 2~4mA **_,&nbsp;_** deep sleep at ~70uA
- **Reset switch&nbsp;** for starting your project code over, boot 0 button for entering bootloader mode.
- **Really really small!**

- [Next Page](https://learn.adafruit.com/adafruit-qt-py-esp32-s3/pinouts.md)

## Primary Products

### Adafruit QT Py ESP32-S3 WiFi Dev Board with STEMMA QT

[Adafruit QT Py ESP32-S3 WiFi Dev Board with STEMMA QT](https://www.adafruit.com/product/5426)
The ESP32-S3 has arrived in QT Py format - and what a great way to get started with this powerful new chip from Espressif! With dual 240 MHz cores, WiFi and BLE support, and native USB, this QT Py is great for powering your IoT projects.

The ESP32-S3&nbsp;is a highly-integrated,...

In Stock
[Buy Now](https://www.adafruit.com/product/5426)
[Related Guides to the Product](https://learn.adafruit.com/products/5426/guides)
### Adafruit QT Py S3 with 2MB PSRAM WiFi Dev Board with STEMMA QT

[Adafruit QT Py S3 with 2MB PSRAM WiFi Dev Board with STEMMA QT](https://www.adafruit.com/product/5700)
The ESP32-S3 has arrived in QT Py format - and what a great way to get started with this powerful new chip from Espressif! With dual 240 MHz cores, WiFi and BLE support, and native USB, this QT Py is great for powering your IoT projects. Now we even have this powerhouse of a board with built...

Out of Stock
[Buy Now](https://www.adafruit.com/product/5700)
[Related Guides to the Product](https://learn.adafruit.com/products/5700/guides)

## Guide Products

### STEMMA Wired Potentiometer Breakout Board - 10K ohm Linear

[STEMMA Wired Potentiometer Breakout Board - 10K ohm Linear](https://www.adafruit.com/product/4493)
For the easiest way possible to measure twists, turn to this STEMMA potentiometer breakout (ha!). This plug-n-play pot comes with a JST-PH 2mm connector and a matching &nbsp;[JST PH 3-Pin to Male Header Cables - 200mm](https://www.adafruit.com/product/3893), so wiring up is a cinch....

Out of Stock
[Buy Now](https://www.adafruit.com/product/4493)
[Related Guides to the Product](https://learn.adafruit.com/products/4493/guides)
### Adafruit MCP9808 High Accuracy I2C Temperature Sensor Breakout

[Adafruit MCP9808 High Accuracy I2C Temperature Sensor Breakout](https://www.adafruit.com/product/5027)
The MCP9808 digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C. They work great with any microcontroller using standard I2C. With...

In Stock
[Buy Now](https://www.adafruit.com/product/5027)
[Related Guides to the Product](https://learn.adafruit.com/products/5027/guides)
### STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long

[STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long](https://www.adafruit.com/product/4399)
This 4-wire cable is&nbsp;50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.

<a...></a...>

In Stock
[Buy Now](https://www.adafruit.com/product/4399)
[Related Guides to the Product](https://learn.adafruit.com/products/4399/guides)
### STEMMA QT / Qwiic JST SH 4-pin Cable - 100mm Long

[STEMMA QT / Qwiic JST SH 4-pin Cable - 100mm Long](https://www.adafruit.com/product/4210)
This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.

<a...></a...>

Out of Stock
[Buy Now](https://www.adafruit.com/product/4210)
[Related Guides to the Product](https://learn.adafruit.com/products/4210/guides)

## Related Guides

- [Clue Coffee Scale](https://learn.adafruit.com/clue-coffee-scale.md)
- [Ikea Vindriktning Hack with QT Py ESP32-S3 and Adafruit IO](https://learn.adafruit.com/ikea-vindriktning-hack-with-qt-py-esp32-s3-and-adafruit-io.md)
- [Adafruit QT Py ESP32-C3 WiFi Dev Board](https://learn.adafruit.com/adafruit-qt-py-esp32-c3-wifi-dev-board.md)
- [BLE Beacon NeoPixels](https://learn.adafruit.com/ble-beacon-neopixels.md)
- [Stepper Motor Turntable](https://learn.adafruit.com/stepper-motor-turntable.md)
- [Controlling Objects in Unity with a 9 DoF Sensor and Arduino](https://learn.adafruit.com/controlling-objects-in-unity-with-arduino.md)
- [NES Emulator for RP2040 & RP2350 DVI Boards](https://learn.adafruit.com/nes-emulator-for-rp2040-dvi-boards.md)
- [16-Step Drum Sequencer](https://learn.adafruit.com/16-step-drum-sequencer.md)
- [Adafruit QT Py ESP32-S2 and QT Py ESP32-S2 with uFL Antenna](https://learn.adafruit.com/adafruit-qt-py-esp32-s2.md)
- [Adafruit IO IOT Hub with the Adafruit FunHouse](https://learn.adafruit.com/adafruit-io-hub-with-the-adafruit-funhouse.md)
- [Fruit Jam Nintendo Entertainment System and Retro Jam](https://learn.adafruit.com/fruit-jam-nintendo-entertainment-system.md)
- [Air Quality Sensor 3D Printed Enclosure](https://learn.adafruit.com/air-quality-sensor-silo-house.md)
- [Adafruit TRRS Trinkey](https://learn.adafruit.com/adafruit-trrs-trinkey.md)
- [Air Quality Monitor and Case](https://learn.adafruit.com/aqi-case.md)
- [AS5600 Super Smooth Rotary Encoder](https://learn.adafruit.com/as5600-smooth-rotary-encoder.md)
