Angled shot of a Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit connected to several different steppers and servos.
The original Adafruit Motorshield kit is one of our most beloved kits, which is why we decided to make something even better. We have upgraded the shield kit to make the bestest,...
Out of Stock
Adafruit 16-Channel 12-bit PWM/Servo Driver with I2C interface
You want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise PWM output. Then...
$14.95
In Stock
Top down view of a Adafruit 16-Channel 12-bit PWM/Servo Shield - I2C interface connected to 16 servos.
You want to make a cool Arduino robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise PWM...
$17.50
In Stock
Continuous Rotation Servo with three pin cable
This servo rotates fully forward or backward instead of moving to a position. You can use any servo code, hardware, or library to control these servos. Good for making simple moving...
$11.95
In Stock
Standard hobby servo with three pin cable
This high-torque standard servo can rotate approximately 180 degrees (90 in each direction). You can use any servo code, hardware, or library to control these servos. Good for...
Out of Stock
Micro servo with three pin cable
Tiny little servo can rotate approximately 180 degrees (90 in each direction) and works just like the standard kinds you're used to but smaller. You can use any servo...
$5.95
In Stock
Analog Feedback Servo with three pin cable and one pin cable
It looks like a servo, it acts like a servo, but it's more than just a servo! We got a factory to custom-make these classic 'standard' sized hobby servos with a twist - the...
$14.95
In Stock
Metal Gear Analog Feedback Micro Servo with three pin cable and one pin cable
It looks like a micro servo, it acts like a micro servo, but it's more than just a micro servo! We got a factory to custom-make these quality metal-geared 'micro' sized...
$14.95
In Stock
Angled shot of a Stepper motor - NEMA-17.
A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a max...
$14.00
In Stock
Angled shot of small Reduction Stepper Motor
This is a great first stepper motor, good for small projects and experimenting with steppers. This uni-polar motor has a built-in mounting plate with two mounting holes. There are only...
$4.95
In Stock
Angled shot of a Small Reduction Stepper Motor.
This is a great first stepper motor, good for small projects and experimenting with steppers. This uni-polar motor has a built in mounting plate with two mounting holes. There are only...
$4.95
In Stock
 L293D Dual H-Bridge Motor Driver for DC or Steppers
Run four solenoids, two DC motors, or one bi-polar or uni-polar stepper with up to 600mA per channel using the L293D. These are perhaps better known as "the drivers in our...
$8.95
In Stock
DC Toy Hobby Motor
These are standard '130 size' DC hobby motors. They come with a wider operating range than most toy motors: from 4.5 to 9VDC instead of 1.5-4.5V. This range makes them perfect...
Out of Stock
Vibrating Mini Motor Disc with two wires
*BZZZZZZZZZZ* Feel that? That's your little buzzing motor, and for any haptic feedback project you'll want to pick up a few of them. These vibe motors are tiny discs,...
$1.95
In Stock