# Adafruit MicroLipo and MiniLipo Battery Chargers

## Overview

![](https://cdn-learn.adafruit.com/assets/assets/000/017/030/medium800/adafruit_products_1904-00.jpg?1401473840)

Sooner or later you'll need to cut the cord...the power cord! Untether your electronic project from the tyranny of the wall adapter and take it out into the world. That's where batteries come in, and you may have been seduced by the high power density, large current capabilites and recharge-ability of Lithium Polymer or Lithium Ion batteries. These battery chemistries have quickly become the most popular rechargeable batteries in consumer products, powering everything from keychain mp3 players to huge laptops.

![](https://cdn-learn.adafruit.com/assets/assets/000/017/042/medium800/adafruit_products_1304-01.jpg?1401477085)

Thanks to the big market demand, the price of lipoly (for short) batteries has plummeted. Now you can get batteries for $10 each, or even 'recycle' batteries from old cell phones.   
  
**However, these batteries need a special type of charger!** You can't just use a NiMH or NiCad battery charger, even a LiFePo charger wont cut it. Instead, a proper Lithium charger is required.

![](https://cdn-learn.adafruit.com/assets/assets/000/083/621/medium800/adafruit_products_MicroLipoChargerUSBC_charging.jpg?1572988640)

Charging is performed in three stages: first a preconditioning charge, then a constant-current fast charge and finally a constant-voltage trickle charge to keep the battery topped-up. The charge current is 100mA by default, so it will work with any size battery and USB port. If you want you can easily change it over to 500mA mode by soldering closed the jumper on the front, for when you'll only be charging batteries with 500mAh size or larger.

![](https://cdn-learn.adafruit.com/assets/assets/000/017/031/medium800/adafruit_products_1904-05.jpg?1401474040)

Adafruit has a few small basic chargers that can satisfy your LiPo charging needs. **All of these chargers can only do 1-cell chargers for 3.7V/4.2V cells.** These are by far the most common and all the LiIon/LiPo batteries in the Adafruit shop will work quite nicely.

- [Next Page](https://learn.adafruit.com/adafruit-microlipo-and-minilipo-battery-chargers/battery-types.md)

## Related Guides

- [Make It Glow - Your First NeoPixel Project](https://learn.adafruit.com/make-it-glow-your-first-neopixel-project.md)
- [Cartoon Network and Make Code - Rose Quartz Shield Umbrella](https://learn.adafruit.com/cartoon-network-and-make-code-rose-quartz-shield-umbrella.md)
- [Adafruit Circuit Playground Express](https://learn.adafruit.com/adafruit-circuit-playground-express.md)
- [NeoPixel Flame Torch](https://learn.adafruit.com/neopixel-flame-torch.md)
- [Cyberpunk Santa Eye](https://learn.adafruit.com/cyberpunk-santa-eye.md)
- [Unicorn Hat with Moving Ears](https://learn.adafruit.com/unicorn-hat-with-moving-ears.md)
- [Gemma M0 Sheikah Pendant](https://learn.adafruit.com/gemma-m0-sheikah-pendant.md)
- [Trash-Built Robotic Fish](https://learn.adafruit.com/trash-robo-fish.md)
- [3D Print Ratcatcher 2 Controller Device](https://learn.adafruit.com/3d-print-ratcatcher-2-controller-device-wand.md)
- [Steven Universe Wearable, Fusable Gem](https://learn.adafruit.com/steven-universe-wearable-fusable-gem.md)
- [Glowing Beehive Hairdo Wig](https://learn.adafruit.com/glowing-beehive-hairdo-wig.md)
- [Glowing Fascinator Hat with Gemma M0 and MakeCode](https://learn.adafruit.com/glowing-fascinator-hat-gemma-m0-makecode.md)
- [Fix-It Felix Jr. Hammer with Sound FX](https://learn.adafruit.com/fix-it-felix-jr-hammer.md)
- [Cosplay Floating LED Fireball with Motion Sensing](https://learn.adafruit.com/cosplay-fireball-prop-with-motion-sensing.md)
- [Getting Started with FLORA](https://learn.adafruit.com/getting-started-with-flora.md)