Get ready for our fastest Metro ever - the NXP i.MX RT1011 microcontroller powers this board with a 500 MHz ARM Cortex M7 processor. There's 4 MB of execute-in-place QSPI for firmware + disk storage and 128KB of SRAM in-chip.

Currently we have support for using this board with CircuitPython. There is no Arduino support at this time.

Features:

• NXP i.MX RT1011 processor - ARM Cortex M7 processor running at 500 MHz, with 128KB SRAM and high speed USB!
• AirLift WiFi Co-processor, with TLS/SSL support, plenty of RAM for sockets, communication is over SPI and it has CircuitPython library support ready to go for fast wireless integration.
• 4MB of QSPI XIP Flash.
• Power options - 6-12VDC barrel jack or USB type C.
• UNO-shape so shields can plug in.
• Reset button - Click to restart, double-click to enter UF2 bootloader.
• Boot-mode switches to get into the ROM bootloader (you can always reload code over USB if TinyUF2 gets corrupted somehow).
• SWD connector for advanced debugging access.
• On/Off switch
• STEMMA QT connector for I2C devices.
• On/User LEDs + status NeoPixel.
• Works with CircuitPython!
• 53.2mm x 72mm / 2" x 2.8"
• Height (w/ barrel jack): 14.8mm / 0.6"
• Weight: 22.5g