Thanksfully if you have ESP32 sketches, they'll 'just work' with variations of ESP32. You can find a wide range of examples in the File->Examples->Examples for Adafruit Metro ESP32-S2 subheading (the name of the board may vary so it could be "Examples for Adafruit Feather ESP32 V2" etc)
Let's start by scanning the local networks.
Load up the WiFiScan example under Examples->Examples for YOUR BOARDNAME->WiFi->WiFiScan
And upload this example to your board. The ESP32 should scan and find WiFi networks around you.
For ESP32, open the serial monitor, to see the scan begin.
For ESP32-S2, -S3 and -C3, don't forget you have to click Reset after uploading through the ROM bootloader. Then select the new USB Serial port created by the ESP32. It will take a few seconds for the board to complete the scan.
If you can not scan any networks, check your power supply. You need a solid power supply in order for the ESP32 to not brown out. A skinny USB cable or drained battery can cause issues.
WiFi Connection Test
Now that you can scan networks around you, its time to connect to the Internet!
Copy the example below and paste it into the Arduino IDE:
// SPDX-FileCopyrightText: 2020 Brent Rubell for Adafruit Industries // // SPDX-License-Identifier: MIT /* Web client This sketch connects to a website (wifitest.adafruit.com/testwifi/index.html) using the WiFi module. This example is written for a network using WPA encryption. For WEP or WPA, change the Wifi.begin() call accordingly. This example is written for a network using WPA encryption. For WEP or WPA, change the Wifi.begin() call accordingly. created 13 July 2010 by dlf (Metodo2 srl) modified 31 May 2012 by Tom Igoe */ #include <WiFi.h> // Enter your WiFi SSID and password char ssid[] = "YOUR_SSID"; // your network SSID (name) char pass[] = "YOUR_SSID_PASSWORD"; // your network password (use for WPA, or use as key for WEP) int keyIndex = 0; // your network key Index number (needed only for WEP) int status = WL_IDLE_STATUS; // if you don't want to use DNS (and reduce your sketch size) // use the numeric IP instead of the name for the server: //IPAddress server(74,125,232,128); // numeric IP for Google (no DNS) char server[] = "wifitest.adafruit.com"; // name address for adafruit test char path[] = "/testwifi/index.html"; // Initialize the Ethernet client library // with the IP address and port of the server // that you want to connect to (port 80 is default for HTTP): WiFiClient client; void setup() { //Initialize serial and wait for port to open: Serial.begin(115200); while (!Serial) { ; // wait for serial port to connect. Needed for native USB port only } // attempt to connect to Wifi network: Serial.print("Attempting to connect to SSID: "); Serial.println(ssid); WiFi.begin(ssid, pass); while (WiFi.status() != WL_CONNECTED) { delay(500); Serial.print("."); } Serial.println(""); Serial.println("Connected to WiFi"); printWifiStatus(); Serial.println("\nStarting connection to server..."); // if you get a connection, report back via serial: if (client.connect(server, 80)) { Serial.println("connected to server"); // Make a HTTP request: client.print("GET "); client.print(path); client.println(" HTTP/1.1"); client.print("Host: "); client.println(server); client.println("Connection: close"); client.println(); } } void loop() { // if there are incoming bytes available // from the server, read them and print them: while (client.available()) { char c = client.read(); Serial.write(c); } // if the server's disconnected, stop the client: if (!client.connected()) { Serial.println(); Serial.println("disconnecting from server."); client.stop(); // do nothing forevermore: while (true) { delay(100); } } } void printWifiStatus() { // print the SSID of the network you're attached to: Serial.print("SSID: "); Serial.println(WiFi.SSID()); // print your board's IP address: IPAddress ip = WiFi.localIP(); Serial.print("IP Address: "); Serial.println(ip); // print the received signal strength: long rssi = WiFi.RSSI(); Serial.print("signal strength (RSSI):"); Serial.print(rssi); Serial.println(" dBm"); }
NOTE: You must change the SECRET_SSID
and SECRET_PASS
in the example code to your WiFi SSID and password before uploading this to your board.
After you've set it correctly, upload and check the serial monitor. You should see the following. If not, go back, check wiring, power and your SSID/password
Secure Connection Example
Many servers today do not allow non-SSL connectivity. Lucky for you the ESP32 has a great TLS/SSL stack so you can have that all taken care of for you. Here's an example of a using a secure WiFi connection to connect to the Twitter API.
Copy and paste it into the Arduino IDE:
// SPDX-FileCopyrightText: 2015 Arturo Guadalupi // SPDX-FileCopyrightText: 2020 Brent Rubell for Adafruit Industries // // SPDX-License-Identifier: MIT /* This example creates a client object that connects and transfers data using always SSL. It is compatible with the methods normally related to plain connections, like client.connect(host, port). Written by Arturo Guadalupi last revision November 2015 */ #include <WiFiClientSecure.h> #include <WiFi.h> // Enter your WiFi SSID and password char ssid[] = "YOUR_SSID"; // your network SSID (name) char pass[] = "YOUR_SSID_PASSWORD"; // your network password (use for WPA, or use as key for WEP) int keyIndex = 0; // your network key Index number (needed only for WEP) int status = WL_IDLE_STATUS; // if you don't want to use DNS (and reduce your sketch size) // use the numeric IP instead of the name for the server: //IPAddress server(74,125,232,128); // numeric IP for Google (no DNS) #define SERVER "cdn.syndication.twimg.com" #define PATH "/widgets/followbutton/info.json?screen_names=adafruit" // Initialize the SSL client library // with the IP address and port of the server // that you want to connect to (port 443 is default for HTTPS): WiFiClientSecure client; void setup() { //Initialize serial and wait for port to open: Serial.begin(115200); while (!Serial) { ; // wait for serial port to connect. Needed for native USB port only } // attempt to connect to Wifi network: Serial.print("Attempting to connect to SSID: "); Serial.println(ssid); WiFi.begin(ssid, pass); while (WiFi.status() != WL_CONNECTED) { delay(500); Serial.print("."); } Serial.println(""); Serial.println("Connected to WiFi"); printWifiStatus(); client.setInsecure(); // don't use a root cert Serial.println("\nStarting connection to server..."); // if you get a connection, report back via serial: if (client.connect(SERVER, 443)) { Serial.println("connected to server"); // Make a HTTP request: client.println("GET " PATH " HTTP/1.1"); client.println("Host: " SERVER); client.println("Connection: close"); client.println(); } } uint32_t bytes = 0; void loop() { // if there are incoming bytes available // from the server, read them and print them: while (client.available()) { char c = client.read(); Serial.write(c); bytes++; } // if the server's disconnected, stop the client: if (!client.connected()) { Serial.println(); Serial.println("disconnecting from server."); client.stop(); Serial.print("Read "); Serial.print(bytes); Serial.println(" bytes"); // do nothing forevermore: while (true); } } void printWifiStatus() { // print the SSID of the network you're attached to: Serial.print("SSID: "); Serial.println(WiFi.SSID()); // print your board's IP address: IPAddress ip = WiFi.localIP(); Serial.print("IP Address: "); Serial.println(ip); // print the received signal strength: long rssi = WiFi.RSSI(); Serial.print("signal strength (RSSI):"); Serial.print(rssi); Serial.println(" dBm"); }
As before, update the ssid and password first, then upload the example to your board.
Note we use WiFiClientSecure client
instead of WiFiClient client;
to require a SSL connection!
Text editor powered by tinymce.