There are so many cool projects that use the MagTag, so why limit yourself to just one at a time?

This project allows you to load eight different projects on your MagTag at the same time. You can select which project to display using the four built-in buttons and then have it display that project until you decide to change it.

This project is heavily based on some code that Adafruit community member @DavidGlaude wrote and posted on Twitter.

Parts

This kit contains all the parts except for a cable:

MagTag dev board with enclosure pieces, four magnet feet, and lipoly battery
The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen...
$44.95
In Stock

Or get the pieces separately:

Angled shot of Adafruit MagTag development board with ESP32-S2 and E-Ink display.
The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen even when power...
$34.95
In Stock
Angled shot of four magnet feet.
Got a glorious RGB Matrix project you want to mount and display in your workspace or home? If you have one of the matrix panels listed below, you'll need a pack of these...
$2.50
In Stock
Lithium Ion Polymer Battery 3.7v 420mAh with JST 2-PH connector and short cable
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
$6.95
In Stock
USB Type A to Type C Cable - 1ft - 0.3 meter
As technology changes and adapts, so does Adafruit. This  USB Type A to Type C cable will help you with the transition to USB C, even if you're still...
$3.95
In Stock

This guide was first published on Dec 30, 2020. It was last updated on Dec 30, 2020.

This page (Overview) was last updated on May 15, 2022.

Text editor powered by tinymce.