There are so many cool projects that use the MagTag, so why limit yourself to just one at a time?
This project allows you to load eight different projects on your MagTag at the same time. You can select which project to display using the four built-in buttons and then have it display that project until you decide to change it.
This project is heavily based on some code that Adafruit community member @DavidGlaude wrote and posted on Twitter.
You can put just about any project on here with a little bit of modification, but here are the eight projects that I have decided to include:
This kit contains all the parts except for a cable:
The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen...
Out of Stock
Or get the pieces separately:
The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen even when power...
Out of Stock
Got a glorious RGB Matrix project you want to mount and display in your workspace or home? If you have one of the matrix panels listed below, you'll need a pack of these...
$2.50
In Stock
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
$6.95
In Stock
As technology changes and adapts, so does Adafruit. This  USB Type A to Type C cable will help you with the transition to USB C, even if you're still...
$3.95
In Stock
