If you're like me, one of the things that makes cooking kind of difficult is keeping track of time. This project makes that much less of an issue, giving you a magnetic timer that you can put just about anywhere with both visual and sound alerts to tell you when the timer is done.
This project uses the eInk display, NeoPixels, and built-in buttons of the Adafruit MagTag to make a rechargeable, programmable kitchen timer that is also magnetic. The MagTag displays the time left and then plays an alarm through the speaker and flashes the NeoPixels when the timer is done.
This project doesn't use deep sleep so keep it plugged in between uses OR you can use the on/off switch to turn it off when not in use
This kit contains all the parts except for a cable:
The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen...
Out of Stock
Or get the pieces separately:
The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen even when power...
Out of Stock
Got a glorious RGB Matrix project you want to mount and display in your workspace or home? If you have one of the matrix panels listed below, you'll need a pack of these...
$2.50
In Stock
Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery...
$6.95
In Stock
Get a USB-A to USB-C cable to connect your computer to the MagTag:
As technology changes and adapts, so does Adafruit. This USB Type A to Type C cable will help you with the transition to USB C, even if you're still...
$3.95
In Stock
As technology changes and adapts, so does Adafruit. This USB Type A to Type C cable will help you with the transition to USB C, even if you're still...
$4.95
In Stock
