Vaccinations for COVID are well underway in most countries, and what better way to keep track of vaccinations for your country or region than with a battery-powered, refrigerator magnet that's connected to the internet. This project makes use of the eInk display and the internet capabilities of the ESP32-S2 to automatically display and update the latest vaccination numbers on your Adafruit MagTag.

Parts

This kit contains all the parts except for a cable:

MagTag dev board with enclosure pieces, four magnet feet, and lipoly battery
The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen...
Out of Stock

Or get the pieces separately:

Angled shot of Adafruit MagTag development board with ESP32-S2 and E-Ink display.
The Adafruit MagTag combines the new ESP32-S2 wireless module and a 2.9" grayscale E-Ink display to make a low-power IoT display that can show data on its screen even when power...
$34.95
In Stock
Angled shot of four magnet feet.
Got a glorious RGB Matrix project you want to mount and display in your workspace or home? If you have one of the matrix panels listed below, you'll need a pack of these...
$2.50
In Stock
Lithium Ion Polymer Battery 3.7v 420mAh with JST 2-PH connector and short cable
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
Out of Stock

Get a USB-A to USB-C cable to connect your computer to the MagTag:

USB Type A to Type C Cable - 1ft - 0.3 meter
As technology changes and adapts, so does Adafruit. This  USB Type A to Type C cable will help you with the transition to USB C, even if you're still...
$3.95
In Stock
USB Type A to Type C Cable - approx 1 meter / 3 ft long
As technology changes and adapts, so does Adafruit. This  USB Type A to Type C cable will help you with the transition to USB C, even if you're still...
$4.95
In Stock

This guide was first published on Mar 19, 2021. It was last updated on 2021-03-19 15:57:17 -0400.

This page (Overview) was last updated on Oct 08, 2021.

Text editor powered by tinymce.