• The default button pin is A2
• The default NeoPixel pin is A3

NeoPixel Jumper

• NP - This jumper is located on the front of the board to the left of the NeoPixel LED and is labeled NP. If you cut this jumper, it disconnects the NeoPixel data input pin from pin A3.

NeoPixel Pad

• NP - This solder pad is located at the top of the board between the 5V silk text and the NeoPixel LED. It is labeled NP. This pad is attached to the NeoPixel data input pin and can be used to wire the NeoPixel to a different pin if the NeoPixel jumper is cut to disconnect it from pin A3.

Tactile Switch Jumper

• Sw - This jumper is located on the front of the board to the right of the NeoPixel LED and is labeled Sw. If you cut this jumper, it disconnects the button output from pin A2.

Tactile Switch Pad

• Sw - This solder pad is located at the top of the board between the A0 silk text and the NeoPixel LED. It is labeled Sw. This pad is attached to the button output pin and can be used to wire the button to a different pin if the tactile switch jumper is cut to disconnect it from pin A2.