0

REST API

by Justin Cooper

The new IO API docs can now be found at: https://io.adafruit.com/api/docs

The IO API is over HTTPS where possible. Some devices may not support HTTPS easily, so we do offer the API over the unsecure HTTP protocol, used at your own risk.

The base URL is:
Download file 
https://io.adafruit.com/api

The current version of the api is: v2.

If you'd like to keep working with the v1 API, you can use /api/v1.

BROWSER HTTP STATUS CODES
This guide was first published on Jan 22, 2015. It was last updated on Oct 17, 2018. This page (REST API) was last updated on Oct 08, 2018.

RELATED GUIDES

Adafruit IO Basics: Servo
Move physical objects with the power of Adafruit IO!
by Todd Treece
This guide is part of a series of guides that cover the basics of using Adafruit IO. It will show you how to wirelessly control a servo from Adafruit IO.
Controlling Motors using the Raspberry Pi and RasPiRobot Board V2
Learn how to use the RRBV2 to control motors.
by Simon Monk
In this guide, I show how you can make your Raspberry Pi control small DC motors using the RasPiRobot Board V2 motor controller Pi Plate.
Monitor Your Home With the Raspberry Pi B+
Remotely access temperature and humidity levels (plus camera shots) around your house!
by M. Schwartz
There are lots of devices on the market that allow you to monitor your home from a central interface. In this guide, we are going to make our own DIY version of such devices, based on the Raspberry Pi B+.
Adafruit IO Basics: Analog Input
Send real time analog sensor data to Adafruit IO!
by Todd Treece
This guide is part of a series of guides that cover the basics of using Adafruit IO. It will show you how to send analog values to Adafruit IO from a photocell.