Arduino Wiring

You will need the following parts for this tutorial:

  • 1x Adafruit IO compatible Feather
  • 3x jumper wires
  • 1x micro servo

You will need to connect the following pins to the servo using the three jumper wires:

  • Feather GND to the brown or black servo wire
  • Feather 3V to the red servo wire
  • Feather Pin 2 to the yellow servo wire

This guide was first published on Feb 21, 2017. It was last updated on Mar 25, 2024.

This page (Wiring) was last updated on Mar 08, 2024.

Text editor powered by tinymce.