Deleted feeds are permanently deleted, cannot receive any new data, and will not be included in full account downloads. Existing data may be downloaded from the feed's page, prior to deletion.

To delete a feed, navigate back to the list of feeds by clicking on the Feeds button on the header.

From the list of feeds, locate the feed you'd like to delete and click the checkbox next to the feed's name.

Click the Delete Feed button.

A dropdown will appear to double-check that you'd like to delete this feed. Click Delete Feeds.

The feed is now deleted from your account.

Deleting Adafruit.io Feeds for WipperSnapper Devices

If you are using Adafruit.io with a no-code device running the WipperSnapper firmware, the process of feed deletion is different.

Each component connected to an Adafruit IO WipperSnapper device is tied to a feed (or multiple feeds, depending on the component's type).

On the Adafruit IO Feeds page, the "traditional" feeds (as discussed above) are listed first. Feeds belonging to a WipperSnapper device have a microcontroller icon next to the feed and no checkboxes next to them. 

To delete a feed belonging to an Adafruit IO WipperSnapper device, from the Feeds page, click the name of the device.

From the device page, click the cog next to the component tied to the feed you'd like to delete.

At the bottom of the component settings, click the trash can icon to delete the component.

Click Confirm to delete the component and the feed associated with it.