You will need the following parts for this tutorial:
- 1x Adafruit IO compatible Feather
- 3x jumper wires
- 1x 10k resistor
- 1x momentary button
You will need to connect the following pins to the button and 10k resistor:
- Feather GND to one side of the momentary button
- Feather Pin 5 to the other side of the momentary button
- Feather 3V to one leg of a 10k resistor
- The second leg of the 10k resistor to the same side of the momentary button as Pin 5
Note: Resistors are not polarized, so the 10k resistor can be connected to the circuit in either direction.
Text editor powered by tinymce.
