Do you want to control your lights or appliances using a microcontroller? Build an internet-connected electrical outlet with an Adafruit PyPortal and CircuitPython. The guide uses a controllable four outlet power relay to avoid hazardous high voltages. Connect the project to Adafruit IO, our free Internet-of-Things platform, to control your appliances from anywhere in the world.

 

Adafruit IO Dashboard

Adafruit IO is the easiest way to stream, log, and interact with your data. It's built from the ground up to be easy to use - we do the hard stuff so you can focus on the fun stuff.

You'll build a customizable dashboard to turn your A/C appliance on or off and can optionally add extra blocks to read feedback from the appliance

Parts

You will need the following parts to complete this guide:

PyPortal, our easy-to-use IoT device that allows you to create all the things for the “Internet of Things” in minutes. Make custom touch screen interface...
$54.95
In Stock
Say goodbye to hazardous high voltage wiring and create the Internet of Things with safe, reliable power control....
$29.95
In Stock
This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. We're carrying these to match up with our...
Out of Stock
Our all-in-one 5V 2.5 Amp + MicroUSB cable power adapter is the perfect choice for powering single-board computers like Raspberry Pi, BeagleBone or anything else that's power...
$7.50
In Stock

This guide was first published on Sep 22, 2020. It was last updated on Sep 22, 2020.

This page (Overview) was last updated on Nov 06, 2020.