These are the finest wire strippers we have used, and if you have to do a lot of wiring, you will agree! They have soft rounded grips - very comfortable to use, and precision ground notches that do a perfect job every time. No more yanking or twisting to strip wires cleanly and quickly.

If you want to make a kit you'll need some solder. This 100g (about 1/4 lb) spool is just the right amount, not too much (like 1 lb spools) and not too little (like those little 'pocket clip' vials). 0.3mm diameter, 60/40 'no clean' rosin core. Good for all through-hole...

Strangely enough, that's the technical term for this desoldering vacuum tool. Useful in cleaning up mistakes, every electrical engineer has one of these on their desk.To use, depress the end to engage the vacuum. Then heat up the to-be-desoldered joint until it is liquid. With your...

Used along with the solder sucker to clean up soldering messes. Wick really comes in handy when soldering or desoldering surface-mount parts. Even if you don't have the best iron for SMT work, a bit of wick will fix it up.1.5mm wick, and 1.5m long, so you have plenty to work...

A real stand with sponge and solidly-built sheet metal holder prevents your iron from 'rolling away' or burning a hole in the table. If you're starting out and have a 'pen type' soldering iron, this is essential for your safety. Comes with a sponge, too!

This 'pen-style' soldering iron is just about the best entry-level tool I've seen. It's not as powerful as a Weller WES51 but it is self-contained and easy to use. With proper care, it will last for many years. Turn it off when not in use, clean the plated tip with a...

You can solder! Adafruit offers a fun and exciting "badges" of achievement for electronics, science and engineering. We believe everyone should be able to be rewarded for learning a useful skill, a badge is just one of the many ways to show and share.This is the "I...

These are the best diagonal cutters, large super-comfortable grip to use and have strong nippers for perfect trimming of wires and leads. I've used my pair every day for years.

The classic 'third hand tool,' as seen on every desk! We have one next to our Panavise jr, they complement each other well. This tool is good for holding small PCBs and wires for tinning or soldering to parts. Every...