# Adafruit FunHouse ## Overview ![](https://cdn-learn.adafruit.com/assets/assets/000/101/454/medium800thumb/FunHouse_sensors.jpg?1618436946) Home is where the heart is...it's also where we keep all our electronic bits. So why not wire it up with sensors and actuators to turn our house into an electronic wonderland. Whether it's tracking the environmental temperature and humidity in your laundry room, or notifying you when someone is detected in the kitchen, to sensing when a window was left open, or logging when your cat leaves through the pet door, this board is designed to make it way easy to make WiFi-connected home automation projects. ![](https://cdn-learn.adafruit.com/assets/assets/000/101/452/medium800/sensors_FunHouse_back.jpg?1618436818) The main processor is the ESP32-S2, which has the advantage of the low cost and power of the ESP32 with the flexibility of CircuitPython support thanks to native USB support. There's also Arduino support for this chip, and many existing ESP32 projects seem to run as-is. Note this chip does not have BLE support, but for WiFi projects its great. You can use it to connect to IoT services or just the Internet in general, with SSL support and this module has plenty of PSRAM for any kind of data processing. ![](https://cdn-learn.adafruit.com/assets/assets/000/101/453/medium800/sensors_FunHouse_STEMMA_side.jpg?1618436831) The board is designed to make it easy to wire up sensors with little or no soldering. There are built in sensors for light, pressure, humidity and temperature sensors. [Three JST PH plugs allow for quick connection of STEMMA boards](https://www.adafruit.com/category/1019) that use digital or analog I/O, and there's a [STEMMA QT port for any I2C devices.](https://www.adafruit.com/category/620) ![](https://cdn-learn.adafruit.com/assets/assets/000/101/455/medium800/sensors_FunHouse_top_angle.jpg?1618436959) Here's what we included on this development board: - **ESP32-S2 240MHz Tensilica processor** - the next generation of ESP32, now with native USB so it can act like a keyboard/mouse, MIDI device, disk drive, etc! - **WROVER module** has FCC/CE certification and comes with 4 MByte of Flash and 2 MByte of PSRAM - you can have huge data buffers - **[1.54" Color TFT display with 240x240 pixels](https://www.adafruit.com/product/4421).** This petite display is one of our favorites, with SPI interface and a controllable backlight. - **USB C** power and data connector - **Five mini RGB DotStar LEDs** on the top, for animations or easily-visible notification - **Three buttons** can be used to wake up the ESP32 from deep-sleep, or select different modes - **[DPS310](https://www.adafruit.com/product/4494) barometric pressure and temperature sensor** - **[AHT20](https://www.adafruit.com/product/4566) relative humidity and temperature sensor** - Plug in socket for **[Mini PIR sensor](https://www.adafruit.com/product/4871)** (not included) - Front facing **light sensor** - **Speaker/Buzzer** can play tones and beeps for audible notification. - **STEMMA QT** port for [attaching all sorts of I2C devices](https://www.adafruit.com/stemma) - Three **STEMMA 3 pin JST** connectors for attaching [NeoPixels](https://www.adafruit.com/product/3919), [speakers](https://www.adafruit.com/product/3885), [servos](https://www.adafruit.com/product/4326) or [relays](https://www.adafruit.com/product/4409). - Three **capacitive touch pads** and one **capacitive touch slider** with 5 elements. - **On/Off switch** - **Boot** and **Reset buttons** for re-programming ![](https://cdn-learn.adafruit.com/assets/assets/000/101/456/medium800/sensors_FunHouse_USB_side.jpg?1618436965) - [Next Page](https://learn.adafruit.com/adafruit-funhouse/pinouts.md) ## Primary Products ### Adafruit FunHouse - WiFi Home Automation Development Board [Adafruit FunHouse - WiFi Home Automation Development Board](https://www.adafruit.com/product/4985) Home is where the heart is...it's also where we keep all our electronic bits. So why not wire it up with sensors and actuators to turn our house into an electronic wonderland. Whether it's tracking the environmental temperature and humidity in your laundry room, or notifying you when... Out of Stock [Buy Now](https://www.adafruit.com/product/4985) [Related Guides to the Product](https://learn.adafruit.com/products/4985/guides) ## Guide Products ### STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long [STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long](https://www.adafruit.com/product/4399) This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove. In Stock [Buy Now](https://www.adafruit.com/product/4399) [Related Guides to the Product](https://learn.adafruit.com/products/4399/guides) ## Related Guides - [Neocontroller Color Grading Input Box](https://learn.adafruit.com/neocontroller-color-grading-input-box.md) - [Adafruit ESP32-S2 Reverse TFT Feather](https://learn.adafruit.com/esp32-s2-reverse-tft-feather.md) - [USB Rotary Media Dial](https://learn.adafruit.com/usb-rotary-media-dial.md) - [Karel The Robot In CircuitPython](https://learn.adafruit.com/karel-the-robot-in-circuitpython.md) - [CYBERDECK Expansion Plate](https://learn.adafruit.com/cyberdeck-plate.md) - [DIY Trinkey No-Soldering USB Air Quality Monitor](https://learn.adafruit.com/diy-trinkey-no-solder-air-quality-monitor.md) - [FunHouse 3D Printed Stand](https://learn.adafruit.com/funhouse-3d-printed-stand.md) - [Adafruit Metro ESP32-S3](https://learn.adafruit.com/adafruit-metro-esp32-s3.md) - [MacroPad 2FA TOTP Authentication Friend](https://learn.adafruit.com/macropad-2fa-totp-authentication-friend.md) - [No-Code WipperSnapper Summoning Horn](https://learn.adafruit.com/adafruit-io-wippersnapper-summoning-horn.md) - [Toddler Timer](https://learn.adafruit.com/toddler-timer.md) - [CircuitPython Libraries on any Computer with FT232H](https://learn.adafruit.com/circuitpython-on-any-computer-with-ft232h.md) - [QT Py CH32V203 eInk / ePaper Daily Calendar and Clock](https://learn.adafruit.com/ch32v203-eink-epaper-calendar-and-clock.md) - [Using the Adafruit FunHouse with Home Assistant](https://learn.adafruit.com/using-the-adafruit-funhouse-with-home-assistant.md) - [Adafruit QT Py ESP32 Pico](https://learn.adafruit.com/adafruit-qt-py-esp32-pico.md)