# Adafruit Feather M4 Express

## Overview

It's what you've been waiting for, the Feather M4 Express featuring ATSAMD51. This Feather is fast like a swift, smart like an owl, strong like a ox-bird (it's half ox, half bird, OK?) This feather is powered by our new favorite chip, the **ATSAMD51J19A** -&nbsp; with its **120MHz Cortex M4** with floating point support and **512KB Flash and 192KB RAM**. Your code will zig and zag and zoom, and with a bunch of extra peripherals for support, this will for sure be your favorite new chipset.

![](https://cdn-learn.adafruit.com/assets/assets/000/057/234/medium800/arduino_compatibles_3857_iso_breadboard_demo_ORIG_2018_06.jpg?1531009604)

And best of all, it's a Feather - so you know it will work with all our FeatherWings! What a great way to quickly get up and running.

The most exciting part of the Feather M4 is that while you can use it with the Arduino IDE - and it's bonkers fast when you do, we are shipping it with CircuitPython on board. When you plug it in, it will show up as a very small disk drive with main.py on it. Edit main.py with your favorite text editor to build your project using Python, the most popular programming language. No installs, IDE or compiler needed, so you can use it on any computer, even ChromeBooks or computers you can't install software on. When you're done, unplug the Feather and your code will go with you.

You can also use [MakeCode](https://maker.makecode.com/)'s block-based GUI coding on this board.

![](https://cdn-learn.adafruit.com/assets/assets/000/057/235/medium800/arduino_compatibles_3857_iso_ORIG_2018_06.jpg?1531009610)

Here are some of the updates you can look forward to when using Feather M4:

- Measures 2.0" x 0.9" x 0.28" (51mm x 23mm x 8mm) without headers soldered in
- Light as a (large?) feather - 5 grams
- ATSAMD51 32-bit Cortex M4 core running at 120 MHz, 32-bit, 3.3V logic and power
- Hardware DSP and floating point support
- 512 KB flash, 192 KB RAM
- 2 MB SPI FLASH chip for storing files and CircuitPython code storage.
- No EEPROM
- 32.768 KHz crystal for clock generation & RTC
- 3.3V regulator with 500mA peak current output
- USB native support, comes with USB bootloader and serial port debugging
- Built in crypto engines with AES (256 bit), true RNG, Pubkey controller
- Tons of GPIO! 21 x GPIO pins with following capabilities:
  - Dual 1 MSPS 12 bit true analog DAC (A0 and A1) - can be used to play 12-bit stereo audio clips
  - Dual 1 MSPS 12 bit ADC (6 analog pins some on ADC1 and some on ADC2)
  - 6 x hardware SERCOM - Native hardware SPI, I2C and Serial all available
  - 16 x PWM outputs - for servos, LEDs, etc
  - I2S input and output
  - 8-bit Parallel capture controller (for camera/video in)

- Built in 100mA lipoly charger with charging status indicator LED
- Pin #13 red LED for general purpose blinking
- Power/enable pin
- 4 mounting holes
- Reset button

![](https://cdn-learn.adafruit.com/assets/assets/000/057/237/medium800/arduino_compatibles_3857_quarter_ORIG_2018_06.jpg?1531009618)

The&nbsp; **Feather M4 Express** &nbsp;uses the extra space left over to add a&nbsp; **Mini NeoPixel** ,&nbsp; **2 MB SPI Flash&nbsp;** storage and a little prototyping space. You can use the SPI Flash storage like a very tiny hard drive. When used in CircuitPython, the 2 MB flash acts as storage for all your scripts, libraries and files. When used in Arduino, you can read/write files to it, like a little datalogger or SD card, and then with our helper program, access the files over USB.

**Easy reprogramming** : the Feather M4 comes pre-loaded with the&nbsp;[UF2 bootloader](https://learn.adafruit.com/adafruit-feather-m0-express-designed-for-circuit-python-circuitpython/uf2-bootloader), which looks like a USB storage key. Simply drag firmware on to program, no special tools or drivers needed! It can be used to load up CircuitPython or Arduino IDE (it is bossa-compatible)

Comes fully assembled and tested, with the UF2 USB bootloader. We also toss in some headers so you can solder it in and plug into a solderless breadboard.&nbsp;

![](https://cdn-learn.adafruit.com/assets/assets/000/057/236/medium800/arduino_compatibles_3857_kit_ORIG_2018_06.jpg?1531009613)

- [Next Page](https://learn.adafruit.com/adafruit-feather-m4-express-atsamd51/update-the-uf2-bootloader.md)

## Primary Products

### Adafruit Feather M4 Express - Featuring ATSAMD51

[Adafruit Feather M4 Express - Featuring ATSAMD51](https://www.adafruit.com/product/3857)
It's what you've been waiting for, the Feather M4 Express featuring ATSAMD51. This Feather is fast like a swift, smart like an owl, strong like a ox-bird (it's half ox, half bird, OK?) This feather is powered by our new favorite chip, the **ATSAMD51J19** -&nbsp; with...

In Stock
[Buy Now](https://www.adafruit.com/product/3857)
[Related Guides to the Product](https://learn.adafruit.com/products/3857/guides)

## Featured Products

### Stacking Headers for Feather - 12-pin and 16-pin female headers

[Stacking Headers for Feather - 12-pin and 16-pin female headers](https://www.adafruit.com/product/2830)
These two **Female Stacking Headers** alone are, well, lonely. But pair them with any of our [Feather](https://www.adafruit.com/categories/777) boards and you're in business!

What do they do? They stack. Put the headers through your Feather and then you can...

Out of Stock
[Buy Now](https://www.adafruit.com/product/2830)
[Related Guides to the Product](https://learn.adafruit.com/products/2830/guides)
### Header Kit for Feather - 12-pin and 16-pin Female Header Set

[Header Kit for Feather - 12-pin and 16-pin Female Header Set](https://www.adafruit.com/product/2886)
These two&nbsp; **Female&nbsp;Headers** &nbsp;alone are, well, lonely. But pair them with any of our&nbsp;[Feather](https://www.adafruit.com/categories/777)&nbsp;boards and you're in business!

What do they do? They get soldered on either side of the Feather...

Out of Stock
[Buy Now](https://www.adafruit.com/product/2886)
[Related Guides to the Product](https://learn.adafruit.com/products/2886/guides)
### Short Headers Kit for Feather - 12-pin + 16-pin Female Headers

[Short Headers Kit for Feather - 12-pin + 16-pin Female Headers](https://www.adafruit.com/product/2940)
These two&nbsp; **Short** &nbsp; **Female&nbsp;Headers** &nbsp;alone are, well, lonely. But pair them with any of our&nbsp;[Feather](https://www.adafruit.com/categories/777)&nbsp;boards and you're in business!

These headers are particularly cute and...

In Stock
[Buy Now](https://www.adafruit.com/product/2940)
[Related Guides to the Product](https://learn.adafruit.com/products/2940/guides)
### Lithium Ion Polymer Battery - 3.7v 500mAh

[Lithium Ion Polymer Battery - 3.7v 500mAh](https://www.adafruit.com/product/1578)
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 500mAh for a total of about 1.9 Wh. If you need a larger (or smaller!) battery, <a...></a...>

In Stock
[Buy Now](https://www.adafruit.com/product/1578)
[Related Guides to the Product](https://learn.adafruit.com/products/1578/guides)
### Lithium Ion Polymer Battery - 3.7V 350mAh

[Lithium Ion Polymer Battery - 3.7V 350mAh](https://www.adafruit.com/product/2750)
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 350mAh for a total of about 1.3 Wh. If you need a larger (or smaller!) battery, <a...></a...>

In Stock
[Buy Now](https://www.adafruit.com/product/2750)
[Related Guides to the Product](https://learn.adafruit.com/products/2750/guides)

## Related Guides

- [Daily Cheer Automaton](https://learn.adafruit.com/daily-cheer-automaton.md)
- [Make It Talk](https://learn.adafruit.com/make-it-talk.md)
- [CircuitPython Motorized Camera Slider](https://learn.adafruit.com/circuitpython-motorized-camera-slider.md)
- [eInk FeatherWing Display Stand](https://learn.adafruit.com/eink-featherwing-display-stand.md)
- [Multi-tasking with CircuitPython](https://learn.adafruit.com/multi-tasking-with-circuitpython.md)
- [Zelda Master Sword](https://learn.adafruit.com/zelda-master-sword.md)
- [Introducing Adafruit Feather](https://learn.adafruit.com/adafruit-feather.md)
- [Program CircuitPython USB Devices with iPhone & iPad](https://learn.adafruit.com/use-circuitpython-devices-with-iphone-ipad.md)
- [Esenciales para CircuitPython](https://learn.adafruit.com/esenciales-para-circuitpython.md)
- [CircuitPython displayio Setup for TFT FeatherWings](https://learn.adafruit.com/using-circuitpython-displayio-with-a-tft-featherwing.md)
- [Deco Two-Key Feather Macro Pad](https://learn.adafruit.com/deco-two-key-keypad-macropad-circuitpython-feather.md)
- [CircuitPython 101: Basic Builtin Data Structures](https://learn.adafruit.com/basic-datastructures-in-circuitpython.md)
- [MIDI Laser Harp with Time of Flight Distance Sensors](https://learn.adafruit.com/midi-laser-harp-time-of-flight-sensors.md)
- [Making oscilloscope images with DACs](https://learn.adafruit.com/dac-oscilloscope-images.md)
- [Multi-Sensor IoT Environmental Sensor Box With CircuitPython](https://learn.adafruit.com/remote-iot-environmental-sensor.md)
