Front view of a white hand touching Adafruit DPI TFT Kippah for Raspberry Pi with Touch Support that connected to a Raspberry Pi
A TFT panel connected to a Raspberry Pi without the use of an HDMI decoder? What is this sorcery??? It's the DPI Kippah from Adafruit! This HAT-like* board snaps...
$19.95
In Stock
Adafruit DPI TFT Kippah for Raspberry Pi connected to a Pi and display.
A TFT panel connected to a Raspberry Pi without the use of an HDMI decoder? What is this sorcery??? It's the DPI Kippah from Adafruit! This HAT-like* board snaps...
$13.95
In Stock
Bare rectangular TFT display with flex connector
This 4.3" TFT screen has lots of pixels, 480x272 to be exact, an LED backlight and a resistive touchscreen overlay. Its great for when you need a lot of space for graphics or a...
$29.95
In Stock
Bare rectangular TFT display with flex connector
This 5.0" TFT screen has lots of pixels, 800x480 to be exact, an LED backlight and a resistive touchscreen overlay. Its great for when you need a lot of space for graphics or a...
$29.95
In Stock
Bare rectangular TFT display with flex connector
This 5.0" TFT screen has lots of pixels, 800x480 to be exact, and an LED backlight. Its great for when you need a lot of space for graphics. These screens are commonly seen in...
$27.50
In Stock
Bare rectangular TFT display with flex connector
This 7.0" TFT screen has lots of pixels, 800x480 to be exact, an LED backlight and a resistive touchscreen overlay. Its great for when you need a lot of space for graphics or a...
$34.95
In Stock
Bare rectangular TFT display with flex connector
This 7.0" TFT screen has lots of pixels, 800x480 to be exact, and an LED backlight. Its great for when you need a lot of space for graphics. These screens are commonly seen in...
$29.95
In Stock
40-pin FPC Extension Board with  200mm long Cable
Give your 40 pin, 0.5mm pitch, devices a strrrreeeetch with this extension board.  This 40pin FPC extension board has two 40-pin flex connectors (both are bottom contact type),...
$4.50
In Stock
Adjustable Bent-Wire Stand for up to 7 Tablets and Small Screens
This handy bent-wire display stand was originally designed to hold up 7" tablets but the rubberized design is great for general purpose electronics & TFT holding. We use it to...
$4.95
In Stock