Featured Products

Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit

PRODUCT ID: 2348
Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper...
$22.50
IN STOCK

Female DC Power adapter - 2.1mm jack to screw terminal block

PRODUCT ID: 368
If you need to connect a DC power wall wart to a board that doesn't have a DC jack - this adapter will come in very handy! There is a 2.1mm DC jack on one end, and a screw terminal...
OUT OF STOCK

Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA

PRODUCT ID: 324
A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a max...
$14.00
IN STOCK

DC Toy / Hobby Motor - 130 Size

PRODUCT ID: 711
These are standard '130 size' DC hobby motors. They come with a wider operating range than most toy motors: from 4.5 to 9VDC instead of 1.5-4.5V. This range makes them perfect...
OUT OF STOCK

6 x AA battery holder with 5.5mm/2.1mm plug

PRODUCT ID: 248
Make a portable power brick with plenty of juice! Use Alkaline AA's for a 9V 3000-4000mAh power supply, or rechargeable NiMH for 2000mAh 7.5V supply. Either one is good for running...
$2.50
IN STOCK

4 x AA Battery Holder with On/Off Switch

PRODUCT ID: 830
Make a nice portable power pack with this 4 x AA battery holder. It fits any alkaline or rechargeable AA batteries in series. There's a snap on cover and an on/off switch which can...
OUT OF STOCK

8 x AA battery holder with 5.5mm/2.1mm Plug and On/Off Switch

PRODUCT ID: 875
Make a portable power brick with plenty of juice! Use Alkaline AA's for a 12V 3000-4000mAh power supply, or rechargeable NiMH for 2000mAh 9.6V supply. Either one is good for running...
$5.95
IN STOCK