Since the Crickit can only drive 5V power, you'll need to stick to this small 5V solenoid

Mini Push-Pull Solenoid wired to Trinket, activating back and forth
Solenoids are basically electromagnets: they are made of a coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the...
In Stock

Vibration Motors

You'll need to extend these wires but they'll work great at 5V and buzz very strongly

Vibrating Mini Motor Disc with two wires
*BZZZZZZZZZZ* Feel that? That's your little buzzing motor, and for any haptic feedback project you'll want to pick up a few of them. These vibe motors are tiny discs,...
In Stock

This guide was first published on May 16, 2018. It was last updated on May 28, 2024.

This page (Recommended Drives) was last updated on Mar 08, 2024.

Text editor powered by tinymce.