To read and manage all the sensors on your CLUE board, we will need libraries to control each and every one of them.
Use the library manager to install them.
Adafruit Sensor Lab
This library generalizes sensor reading for you so you can search for and use various sensors without knowing the specifics - great for starting out with sensor readings in Arduino IDE
If you use Arduino 1.8.10 or later, the IDE will automagically install all the libraries you need to run all the sensor lab demos when you install Sensor Lab. We strongly recommend using the latest IDE so you don't miss one of the libraries!
If you aren't running Arduino IDE 1.8.10 or later, you'll need to install all of the following!
Search for and install the following:
Text editor powered by tinymce.
