Before you start, you'll need some parts to make your BrainCraft HAT run! At a minimum you will need
Raspberry Pi Computer
A working Raspberry Pi (Pi 4+ needed for vision projects, any Pi for audio-only projects)
NOTE: Due to stock limitations we may only be able to offer refunds or store credit for Pis that are defective, damaged or lost in...
Out of Stock
Power supply
Our all-in-one 5V 2.5 Amp + MicroUSB cable power adapter is the perfect choice for powering single-board computers like Raspberry Pi, BeagleBone, or anything else that's...
$8.25
In Stock
The official Raspberry Pi USB-C power supply is here! And of course, we have 'em in classic Adafruit black! Superfast with just the right amount of cable length to get your Pi 4...
$7.95
In Stock
And an SD card. It can be blank or come with software on it.
Add mega-storage in a jiffy using this 8 GB class 4 micro-SD card. It comes with a SD adapter so you can use it with any of our shields or adapters. Preformatted to FAT so it works out...
$9.95
In Stock
For Vision projects
you'll also want a Raspberry Pi camera, a long cable (optional) and camera case (optional)
Snap, snap! The Camera v2 is the new official camera board released by the Raspberry Pi Foundation!The Raspberry Pi Camera Board v2 is a high quality 8...
$29.95
In Stock
This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display for a different...
Out of Stock
This is a basic, classic Adafruit Raspberry Pi Camera Board Enclosure with a black base and a clear top. The case is as minimal as it gets, coming in just...
$2.95
In Stock
These earbud headphones are the perfect accessory for your FONA - they've been tested to work with our modules - but can be used with any iOS or Android device that uses a TRRS...
$3.95
In Stock
Listen up! This single 2.8" x 1.2" speaker is the perfect addition to any audio project where you need 4 ohm impedance and 3W or less of power. We...
$3.95
In Stock
