Prepare the header strip:Cut the strip to length if necessary. It will be easier to solder if you insert it into a breadboard - long pins down |
|
Add the breakout board:Place the breakout board over the pins so that the short pins poke through the breakout pads |
|
And Solder!Be sure to solder all pins for reliable electrical contact. |
|
You're done! Check your solder joints visually and continue onto the next steps |
Assembly
This guide was first published on Apr 22, 2015. It was last updated on Apr 22, 2015.
This page (Assembly) was last updated on Apr 14, 2021.
Text editor powered by tinymce.