Prepare the header strip:Cut the strip to length if necessary. It will be easier to solder if you insert it into a breadboard - long pins down |
|
Add the breakout board:Place the breakout board over the pins so that the short pins poke through the breakout pads |
|
And Solder!Be sure to solder all 8 pins for reliable electrical contact. |
|
You're done! Check your solder joints visually and continue onto the next steps. |
Assembly
The BMP388 and BMP390 have the same soldering technique even though the names and shapes are a little different!
This guide was first published on Apr 02, 2019. It was last updated on Apr 02, 2019.
This page (Assembly) was last updated on Jan 25, 2021.