These boards come with all surface-mount components pre-soldered. The included header strip can be soldered on for convenient use on a breadboard or with 0.1" connectors. However, for applications subject to extreme accelerations, shock or vibration, locking connectors or direct soldering plus strain relief is advised.

Prepare the header strip:

Cut the strip[ to length if necessary.  It will be easier to solder if you insert it into a breadboard - long pins down.

Add the breakout board:

Place the breakout board over the pins.

And Solder!

Be sure to solder all pins for reliable electrical contact.

This guide was first published on Nov 05, 2012. It was last updated on 2017-12-19 23:22:07 -0500.

This page (Assembly) was last updated on Oct 26, 2012.

Text editor powered by tinymce.