Assembly

Prepare the header strip:

 

Cut the strip to length if necessary. It will be easier to solder if you insert it into a breadboard - long pins down

Add the FeatherWing:

Place the FeatherWing over the pins so that the short pins poke through the two rows of breakout pads

And Solder!

Be sure to solder all pins for reliable electrical contact.

(For tips on soldering, be sure to check out ourGuide to Excellent Soldering).

Start by soldering the first row of headers

Now flip around and solder the other row completely

You're done!

This guide was first published on May 29, 2019. It was last updated on May 29, 2019. This page (Assembly) was last updated on Sep 21, 2019.