Cut the header down to length if necessary. It will be easier to solder if you insert it into a breadboard - long pins down

Add the E-Ink Display


Place the board over the pins so that the short pins poke through the top of the breakout pads

And Solder!


Be sure to solder all pins for reliable electrical contact.

(For tips on soldering, be sure to check out the Guide to Excellent Soldering).

OK, you're done!

This guide was first published on Sep 22, 2021. It was last updated on 2021-09-22 11:49:54 -0400.

This page (Assembly) was last updated on Feb 22, 2022.

Text editor powered by tinymce.