# Adafruit 128x64 OLED FeatherWing
## Overview
A Feather board without ambition is a Feather board without FeatherWings! This is the **FeatherWing 128x64 OLED** : it adds a gorgeous 128x64 monochrome OLED plus 3 user buttons to _any_ Feather main board. Using our [Feather Stacking Headers](https://www.adafruit.com/products/2830) or [Feather Female Headers](http://www.adafruit.com/products/2886) you can connect a FeatherWing on top of your Feather board and let the board take flight!
These displays are small, only about 1.3" diagonal, but very readable due to the high contrast of an OLED display. This screen is made of 128x64 individual white OLED pixels and because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness! We also toss on a reset button and three mini tactile buttons called A B and C, so you can add a mini user interface to your Feather. [If you've used our 128x32 OLED FeatherWing](https://www.adafruit.com/product/2900), you'll be happy to know that this FeatherWing is pin compatible for a quick and easy upgrade.
The display uses only I2C so you can easily connect it up with just two pins used (plus power and ground!). There's an auto-reset circuit and a reset button on the top. We've even included a [SparkFun qwiic](https://www.sparkfun.com/qwiic)-compatible** [STEMMA QT](https://learn.adafruit.com/introducing-adafruit-stemma-qt)** connector for the I2C bus so you can plug and play _any_ of our STEMMA QT, qwiic or [Grove I2C sensors](https://www.adafruit.com/product/4528) and devices!
Tested working with **all Feather boards.** The OLED uses only the two I2C pins on the Feather, and you can pretty much stack it with any other FeatherWing, even ones that use I2C since that is a shared bus.
Comes with a set of 0.1" headers that are unattached, you'll need to solder them in to plug into your Feather board. [Check out our range of Feather boards here.](https://www.adafruit.com/feather)
- [Next Page](https://learn.adafruit.com/adafruit-128x64-oled-featherwing/assembly.md)
## Primary Products
### Adafruit FeatherWing OLED - 128x64 OLED Add-on For Feather
[Adafruit FeatherWing OLED - 128x64 OLED Add-on For Feather](https://www.adafruit.com/product/4650)
A Feather board without ambition is a Feather board without FeatherWings! This is the **FeatherWing 128x64 OLED** : it adds a gorgeous 128x64 monochrome OLED plus 3 user buttons to _any_ Feather main board. Using our
In Stock
[Buy Now](https://www.adafruit.com/product/4650)
[Related Guides to the Product](https://learn.adafruit.com/products/4650/guides)
### Assembled Adafruit FeatherWing OLED - 128x64 OLED Add-on
[Assembled Adafruit FeatherWing OLED - 128x64 OLED Add-on](https://www.adafruit.com/product/6313)
A Feather board without ambition is a Feather board without FeatherWings! This is the **FeatherWing 128x64 OLED** : it adds a gorgeous 128x64 monochrome OLED plus 3 user buttons to _any_ Feather main board. Comes fully assembled so you can connect the...
In Stock
[Buy Now](https://www.adafruit.com/product/6313)
[Related Guides to the Product](https://learn.adafruit.com/products/6313/guides)
## Featured Products
### STEMMA QT / Qwiic JST SH 4-pin Cable - 100mm Long
[STEMMA QT / Qwiic JST SH 4-pin Cable - 100mm Long](https://www.adafruit.com/product/4210)
This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.
Out of Stock
[Buy Now](https://www.adafruit.com/product/4210)
[Related Guides to the Product](https://learn.adafruit.com/products/4210/guides)
### STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long
[STEMMA QT / Qwiic JST SH 4-Pin Cable - 50mm Long](https://www.adafruit.com/product/4399)
This 4-wire cable is 50mm / 1.9" long and fitted with JST SH female 4-pin connectors on both ends. Compared with the chunkier JST PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.
In Stock
[Buy Now](https://www.adafruit.com/product/4399)
[Related Guides to the Product](https://learn.adafruit.com/products/4399/guides)
### STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long
[STEMMA QT / Qwiic JST SH 4-Pin Cable - 200mm Long](https://www.adafruit.com/product/4401)
This 4-wire cable is a little over 200mm / 7.8" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.
In Stock
[Buy Now](https://www.adafruit.com/product/4401)
[Related Guides to the Product](https://learn.adafruit.com/products/4401/guides)
## Related Guides
- [STEMMA Lego base plates](https://learn.adafruit.com/stemma-lego-base-plates.md)
- [CircuitPython USB VID/PID Reporter](https://learn.adafruit.com/circuitpython-usb-vid-pid-reporter.md)
- [Desk Calculator with CircuitPython](https://learn.adafruit.com/desk-calculator-with-circuitpython.md)
- [PyRuler Video Conference Panic Buttons](https://learn.adafruit.com/pyrulervideopanic.md)
- [Adafruit CAN Bus FeatherWing](https://learn.adafruit.com/adafruit-can-bus-featherwing.md)
- [Arduino Prototyping Mounting Plate](https://learn.adafruit.com/arduino-prototyping-mounting-plate.md)
- [Adafruit ATWINC1500 WiFi Breakout](https://learn.adafruit.com/adafruit-atwinc1500-wifi-module-breakout.md)
- [Adafruit VL53L1X Time of Flight Distance Sensor](https://learn.adafruit.com/adafruit-vl53l1x.md)
- [Adafruit Pi Stemma QT Breakout](https://learn.adafruit.com/adafruit-pi-stemma-qt-breakout.md)
- [FeatherWing Proto, Doubler and Tripler](https://learn.adafruit.com/featherwing-proto-and-doubler.md)
- [Adafruit NeoRGB Stemma](https://learn.adafruit.com/adafruit-neorgb-stemma.md)
- [Adafruit PiOLED - 128x32 Mini OLED for Raspberry Pi](https://learn.adafruit.com/adafruit-pioled-128x32-mini-oled-for-raspberry-pi.md)
- [Adafruit 1.3" Color TFT Bonnet for Raspberry Pi](https://learn.adafruit.com/adafruit-1-3-color-tft-bonnet-for-raspberry-pi.md)
- [Adafruit Ultimate GPS Logger Shield](https://learn.adafruit.com/adafruit-ultimate-gps-logger-shield.md)
- [NeoKey Socket Breakout with NeoPixel for MX and CHOC Key Switches](https://learn.adafruit.com/neokey-breakout.md)