0

Downloads and Links

by Bill Earl

Data Sheets:

Schematic

Click to enlarge

lcds___displays_oledchem.png

For the level shifter we use the CD74HC4050 which has a typical propagation delay of ~10ns

DRAWING BITMAPS
Last updated on Nov 17, 2017 Published on Aug 16, 2013

RELATED GUIDES

Blinking an LED with BeagleBone Black
Make an LED Blink using Python on a BeagleBone Black
by Simon Monk
In this tutorial, you will learn how to control an external LED using a BeagleBone Black (BBB) from Python.
Pro Trinket Power Meter
Build a small meter to display voltage, current, and power usage.
by Tony DiCola
Use a Pro Trinket and INA219 breakout to build a small power meter that displays voltage, current, and power consumption on an OLED display.
Track Your Treats: Halloween Candy GPS Tracker
Track your trick or treat candy route to log which houses had the best candy!
by Tony DiCola
Use an Arduino and GPS or FONA808 shield to create a location datalogger that records where you went trick or treating and which houses had the best candy.
Kali Linux on the Raspberry Pi with the PiTFT
Install Kali Linux on your Pi, and add a kernel that supports Adafruit's PiTFT display.
by Brennen Bearnes
Kali is a security and penetration testing distribution, preloaded with a wide range of network tools and other utilities. If you'd like to use it on a Raspberry Pi with the PiTFT display, there's only one real problem: It uses a custom kernel which doesn't presently include all the stuff you need to use the PiTFT as a touchscreen. We'll go over the basics of an install and remedy the kernel situation.