There's no place like home... and if you're like us you've spent a lot of time at home over the past year. It almost feels like a whirlwind picked us up and flew us to a strange world, and we've had to adapt to all these new customs when really we want to return to how life used to be. And, maybe, slowly, we're starting to make our way back. Until that day, we can stay at home and tinker with electronics.

This ADABOX is all about home projects, with the FunHouse development board. It's powered with an ESP32-S2 WiFi chip that can run CircuitPython or Arduino, so its easy to make Internet-connected sensors. And sensors are plentiful in this box, with lots of home automation-friendly sensor modules that you can plug right into the FunHouse.

Whether it's tracking the environmental temperature and humidity in your laundry room, or notifying you when someone is detected in the kitchen, to sensing when a window was left open, or logging when your cat leaves through the pet door, this ADABOX is designed to make it way easy to make WiFi-connected home automation projects.

A huge thank you to Digi-Key for going above-and-beyond to help support Adafruit over the last year. Digi-Key's support made this box possible, check out the millions of sensors and devices they have stocked at digikey.com that you can use to automate your home!

In the Box

Adafruit FunHouse

Home automation made easy, with little or no soldering.

Comes with light, pressure, humidity and temperature sensors.

Three JST PH plugs allow for quick connection of STEMMA boards that use digital or analog I/O, and a STEMMA QT port for any I2C devices.

Acrylic Backplate Kit

This clear back-plate attaches to the FunHouse to make wall-mounting easy. Includes some M3 screws to attach with.

Mini PIR Sensor

Plug into the front of the FunHouse to detect motion.

Infrared Breakbeam Sensor

This invisible sensor can quickly detect when something is in between the emitter and receiver, up to 10" apart.

Ultrasonic Distance Sensor

Measure distances of up to about 3 meters.

Magnetic Door Sensor

This sensor lets you know when a door, drawer or window has been opened.

Water Sensor

Keep wet things wet, and dry things dry by detecting when the dry things get wet by accident!

JST PH 3-Pin Socket Cables

Use these to connect the sensors to your FunHouse board with no soldering.

Extension Jumpers

Plug these into your sensors when you need to get loooooong.

Wire Quick Connects

If you have your own sensors or wires, these quick connects are a handy way to attach two wires with no soldering.

Yellow Plate and Brick Set

Craft a desk stand with these golden bricks.

Double-Sided Foam Tape

Adafruit IO+ One Year Free

Unlock a full year of Adafruit IO+, with extra feeds and capabilities!

This guide was first published on May 13, 2021. It was last updated on 2021-05-18 18:49:48 -0400.

This page (Unboxing Adabox 018) was last updated on Sep 18, 2021.

Text editor powered by tinymce.