Now that you got Adabox 001 you are probably wondering what you can make with it. I always like making temperature monitors since it is fairly simple and can be used to interact with quite a few other items.

In this guide we are going to build a device to read the temperature and sound an alarm if the temperature is too high.

Parts Needed

• Adabox 001 - This will include all of the following needed parts
• Adafruit Feather 32u4 Adalogger
• 16x2 Standard LCD
• Piezo Buzzer
• Diffused Red 10mm LED
• Diffused Green 10mm LED
• Two 12mm Tactile Switch Buttons
• TMP36 - Analog Temperature Sensor
• Full sized breadboard
• Two 560ohm Resistors